Straight Gouge Rubankov, N9, 2mm



Rating : (1)
Shipping: worldwide

4200 p (64.6)

Description

Chisel for carving Petrograd straight gouge N9, 2 mm. A professional woodcarving tool that works great on hardwoods and softwoods. Production factory Petrograd (Russia).

NB! Straight chisel for wood, this is the most primary chisel with a strictly straight blade. It can be flat, semicircular, corner, etc. Used for flat work. The basis of any set of carving tools is semicircular chisels.

Straight Gouge Petrograd is suitable for a variety of tasks, from creating curly shapes to selecting a background. This tools can be used beveled up or down to create concave or convex surfaces. Petrograd chisels are forged from alloyed high-carbon steel. Hardened to a hardness of 59-61 HRc.

The faceted handle is made of precious wood and coated with oil. The impact side is rounded so as not to crush calluses on the palms. The brass ring gives a sophisticated look and prevents the handle from cracking. The internal profile of the chisel is polished, the cutting edge is sharpened and ready to work. These models are not percussion, but they can be paired with a mallet. The stated geometric dimensions may vary slightly, as the tool is made and sharpened by hand. The length of the metal sheet is 145mm. Overall length with handle 280mm. The width of the canvas is 2 mm. Profile N9.

If you are working with flat-relief or bas-relief carving, then first of all you should look at several flat chisels Petrograd.


Share / Save Link:

Specs

Reviews

Instructions ()

Нет файлов

Publications

Recommended products

%

PETROGRAD Polishing set N2, paste 600, 1200, 2000 grit

Набор для полирования N2, ПЕТРОГРАДЪ, полиров.паста 600, 1200 и 2000 грит, 3 бруска. Воскообразные полировальные пасты в виде прямоугольного бруска. Размеры - 60x60x15мм. Зернистость - крупная, средняя и мелкая. Белая - 600грит, коричневая 1200грит, зеленая 2000гритМасса - 180г. Используется для шлифовки и полировки на кругах, ремнях и т. п. Отлично подходят для ручных кожаных брусков Петроградъ.

Сделано в России.

 

2090p(64.6)
Отзывов: 1
>Рейтинг:

Strop PETROGRAD, for carving tools, 150mm*30mm

The bar with glued leather is designed for finishing semi-circular chisels, drawknives, etc. One of the flat sides can also be used for fine-tuning of flat tools. The size of the bar is 150x30 mm. Min radius - 3 mm, max. radius -6 mm. It can be used with polishing pastes. Material - ash, leather - reversal 2mm. Leather color may differ from the image on the site. Made in Russia.

900p
Отзывов: 1
Рейтинг:

Picture framing glazier's hammer, PETROGRAD, model N2

Picture framing hammer or glazier's hammer is a hammer with rotating head for strike nails in frame of picture. Because of its 360 degree rotating triangle head it can be easily position on back of a picture frame and precise strike on nail by slide over surface.

  • hammer weight 180 grams
  • steel rotating triangle head
  • steel round head
  • full head lenght 70mm
  • round head diameter 15mm
  • triangle head diameter 22mm
3200p
Отзывов: 1
Рейтинг:

Leather fingertip for woodcarvers

Leather fingertip is a thumb guard for wood carvers by Petrograd toolworks. Designed to protect hands from sharp tools. Thumb guard protects your finger from cut injuries when you are moving the cutting tool towards thumb, and prevents the formation of calluses when working away from yourself. Watch pictures for more info.

  • made of 2mm leather
  • easy to use
  • save you from injures

Guard has a special ring that prevents it from slipping during operation. The thimble was made of 2mm soft leather, which provides good protection for the toe.

Thumb guard was made by Petrograd toolworks in Saint Petersburg Russia

600p
Отзывов: 1
Рейтинг:

Spoon carving kit N1, small

Small spoon carving kit N1 for carving wooden spoons. This is the so-called starter set that will allow you to cut your first spoon without obstruction, for this the set includes Linden blanks and printed spoon templates. Production of Petrograd toolwroks in Saint Petersburg ( Russia )
Starters spoon carving kit includes:
  • Spoon knife type 1, D 27mm, right-handed
  • Carving knife Bogorodsky type, 240mm/80mm
  • Leather fingertip for woodcarvers
  • Wooden spoon blanks set (Linden)
5225p 5 500 p
Отзывов: 1
Рейтинг:
new

Spoon knife, PETROGRAD, type 1/22, left-handed

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3000p
Отзывов: 1
Рейтинг: