hair, model 1.



Rating : (1)
Shipping: worldwide

17000 p (261.46) out of stock

Description

Frame chair, model 1. Sturdy and beautiful chair. Made in accordance with carpentry rules and traditions. The construction used classic joinery joints with full-fledged spikes and lugs. Material - beech. Coated with tung oil. Everything was done perfectly fit and glued.


Share / Save Link:

Specs

Reviews

Instructions ()

Publications

Carpenter drawknife PETROGRAD N11, u-shaped, with raised arms, 170mm

A flat drawknife with curved and perpendicular cutting edge with handles will be convenient for various operations both in woodworking and carpentry: precise fit of logs in size, manufacture of seats, quick material removal in joinery, etc. Handles are raised above the blade plane and allow work closely to the treated surface. The blade is forged manually from tool steel 65G (Germany 66Mn4, Ck67, USA 1066) and hardened to 55-58 HRC. Sharpening - chamfering up. Handles 140 mm long are made of beech and impregnated with oil. Blade length - 170 mm, width 36 mm. Blade thickness - 6 mm, sharpening angle - 30 degrees. Comes in a leather case with a clasp on the buttons. The design of the drawknives, as well as their sharpening, is recommended by the Russian Carpenters Union for debarking and carpentry work on fitting logs. Other kinds of carpentry work may require regrinding.Blade was fully hardened through, that allows you to repeatedly honing the blade or his fully re-grind it. Totally hand made at PETROGRAD factory of joinery and carpentry tools.

Made in Russia.

4700p
: 1
:

Center finding dowel/tenon pin set PETROGRAD, D5 mm, 6 pcs

Centerfinding pins for furniture dowels. Diameter of punch: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm.Totally hand made atPETROGRAD factory of joinery and carpentry tools.Made in Russia.

380p
: 1
:

Center finding dowel/tenon pin set PETROGRAD, D6 mm, 6 pcs

Centerfinding pins for furniture dowels. Diameter of punch: 5 mm, 6 mm, 8 mm, 10 mm, 12 mm.Totally hand made atPETROGRAD factory of joinery and carpentry tools.Made in Russia.

460p
: 1
:
new

Outdoor axe PETROGRAD, model Roslavl X, staright handle

Outdoor axe. Overall length - 580 mm. Axe height - 175 mm. The length of the cutting edge - 165 mm. The axe is forged by hand from 65G (Germany 66Mn4, Ck67, USA 1066) steel. Sharpening straight. Total weight - 1 kg. Includes leather case to protect the blade. The axe handle is made of maple wood, 500 mm long. The axe is perfectly balanced and is suitable for an enormous type of work, like a hiking axe, for small carpentry and carpentry works, and simply as a universal axe.

Totally hand made atPETROGRAD factory of joinery and carpentry tools.

Made in Russia.

11500p
: 1
:

Checkering tool complete R-11, 60

Checkering tools from R-series have two sides: the right side with teeth, the left side - smooth, used as a guide. The gap between the tool tips is equal to the pitch. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The left blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The right blade has teeth and cuts a new groove during the process of notching from left to right. At the same time between the previous line and the new remains empty space - the line width in the usual row. Thus, it is possible to alternate sections with a notch and neat smooth lines of the same width. Such a notch principle is often called "French" or "Scottish." Beech handle.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

850p
: 1
:

Dressing stone, PETROGRAD, 20*20*70mm

Slurry stone PETROGRAD# 4000, water stone based on quartz grain 3 microns. on a ceramic bond, having an indication in the marking of grit according to Jis.

Nagura # 4000 for surface correction and soaping
This stone is used to correct small irregularities after sharpening and leveling shallow scratches on the surface of the stone.

To fully enjoy your stones, use Nagura before and after work. It cleans the surface of the grinding stone, allowing you to keep it in working condition. Please use a bar with enough water.

Size is about 70*20*20 mm
Gross weight 45 g
Net weight 34 g

520p
: 1
:
%

Protective wax for tools, PETROGRAD, 40ml

Protective wax for instrument maintenance, PETROGRAD, 40ml. Wax is an excellent material for protecting carpentry and cutting tools from corrosion. The oil is also suitable for lubricating secateurs, bone cutters and scissors, chisels, chisels, axes, adzes and other steel tools.
Contains paraffins, stearic acid, gelling agent, stabilizer, preservatives for metals, orthophosphoric acid, which protects instruments from aggressive environments. Perfect for protecting planing knives, chisels and other cutting tools, it is also suitable for protecting firearms from rust. The tool is not included.
The wax is applied to the surface in a thin layer with gloves using a sponge or brush.
Packaging - plastic jar. Volume - 40 ml.
500p
: 1
:

Sharpening stone PETROGRAD, 200*70*20mm, 3000 grit

Water stones. Grain size: 3000 and 6000 grit. Size 200*70*20mm. Abrasive grain - silicon carbide. Bundle - ceramics. Hardness I ensures minimal wear of the stone during operation. When sharpening does not overheat the steel. Does not require the use of oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Made in Japan.

 

2950p
: 1
: