Straight Gouge Rubankov, N7, 3mm

Straight Gouge Rubankov, N7, 3mm (0.12 inches)

Carving chisel "Rubankov" Straight Gouge N7, 3mm (0.12 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 3mm (0.12 inches). The total lenght of the gouge is 280mm (11.02inches), blade lenght is 145mm (5.71inches), the lenght of the handle is 135mm (5.31inches). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood (may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5070p(0) out of stock
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 6mm

Straight Gouge Rubankov, N7, 6mm (0.24 inches)

Carving chisel "Rubankov" Straight Gouge N7, 6mm (0.24 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 6mm ( 0.24 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is only fo hand cutting, should not be used with a mallet.

Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5070p(0)
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 8mm

Straight Gouge Rubankov, N7, 8mm (0.31 inches)

Carving chisel "Rubankov" Straight Gouge N7, 8mm (0.31 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 8mm ( 0.31 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5070p(0)
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 10mm

Straight Gouge Rubankov, N7, 10mm (0.39 inches)

Carving chisel "Rubankov" Straight Gouge N7, 10mm (0.39 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 10mm ( 0.39 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5070p(0) out of stock
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 12mm

Straight Gouge Rubankov, N7, 12mm (0.47 inches)

Carving chisel "Rubankov" Straight Gouge N7, 12mm (0.47 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 12mm ( 0.47 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5640p(0)
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 20mm

Straight Gouge Rubankov, N7, 20mm (0.79 inches)

Carving chisel "Rubankov" Straight Gouge N7, 20mm (0.79 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 20mm ( 0.79 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5640p(0)
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 25(24)mm

Straight Gouge Rubankov, N7, 24mm (0.94 inches)

Carving chisel "Rubankov" Straight Gouge N7, 24mm (0.94 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 24mm ( 0.94 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5920p(0)
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 30mm

Straight Gouge Rubankov, N7, 30mm (1.18 inches)

Carving chisel "Rubankov" Straight Gouge N7, 30mm (1.18 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 30mm ( 1.18 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5920p(0) out of stock
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N7, 40mm

Straight Gouge Rubankov, N7, 40mm (1,57 inches)

Carving chisel "Rubankov" Straight Gouge N72, 40mm (1,57 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 40mm (1,57 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

7040p(0) out of stock
Отзывов: 1
Рейтинг :
new

Stright Gouge Rubankov, N8, 20mm

Carving chisel "Rubankov" Straight Gouge N8, 20mm (0.79 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 20mm ( 0.79 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

6860p(0)
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N9, 16mm

Straight Gouge Rubankov, N9, 16mm (0.63 inches)

Carving chisel "Rubankov" Straight Gouge N9, 16mm (0.63 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 16mm ( 0.63 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

6860p(0) out of stock
Отзывов: 1
Рейтинг :
new

Straight Gouge Rubankov, N11, 3mm

Резчицкая стамеска Rubankov прямая N11, 3мм. Резчицкий инструмент профессионального уровня предназначен для резьбы по твердым и мягким породам древесины. Основа любого комплекта резчицкого инструмента, это прямые стамески. 
Эти модели являются ударными, ими можно работать в паре с киянкой.
Заявленные геометрические размеры могут незначительно варьироваться, так как инструмент изготавливается и затачивается в ручную.
Длина металлического полотна составляет 145 мм. Общая длина с рукоятью 280мм.
Ширина полотна - 3мм. 

Изготовлены на фабрике столярных и плотницких инструментов «ПЕТРОГРАДЪ». 
Производство Россия.
6620p(0) out of stock
Отзывов: 1
Рейтинг :

Petrograd Straight Carving Chisel, N1, 10mm, 150mm

Straight carving chisel N1 has 10mm wide blade(0.39 inches) and flat profile (carving gouge N1, Sweep #1) for better carving abilities. It is universal wood carving chisel that perfectly suits for carving hard or soft wood. Best choice for relief wood carving. This gouge can be used with a mallet.

  • cutting edge width - 10mm (0.39 inches)
  • blade lenght - 145mm (5.71inches)
  • made of alloy steel
  • hand forged
  • hardened to 59-61HRc
  • sharpening - one bevel

Blade of gouge is sharpened, honed and ready to work out of the box. Handle is comfortable for two types of grip. It's a classic english type of handles that a best for woodcarving tool of this type (by our opinion).

  • lenght of handle  - 135mm (5.31inches)
  • total gouge lenght - 280mm (11.02inches)
  • handle made of cherrywood
  • oil coated

Produced by PETROGRAD toolworks in Saint-Petersburg Russia.

Straight carving chisel Specifications:
Weight: 0.21 kg
Type: carving
Steel: 9ХС
Hardness: 59-61HRc
Handle material: cherry*
Handle lenght: 135 mm
Edge: straight
Sharpening angle: 25 degrees
Blade lenght: 145 mm
Blade width: 10 mm
Blade profile: N1
Total lenght: 280 mm
 
* material of handles may changes from batch to batch.
** coating oil may changes too
4900p(0)
Отзывов: 1
Рейтинг :

Straight Carving Chisel Rubankov, N1/DT, 20mm (Allongee)

Straight carving chisel N1 has 20mm wide blade(0.79 inches) and slight profile (carving gouge N1, Sweep #1) for better carving abilities. It is universal wood carving chisel that perfectly suits for carving hard or soft wood. Best choice for relief wood carving. This gouge can be used with a mallet.

  • cutting edge width - 10mm (0.39 inches)
  • blade lenght is 145mm (5.71inches)
  • Made of alloy steel
  • hand forged
  • hardened to 59-61HRc
  • sharpening outer bevel

Blade of gouge is sharpened, honed and ready to work out of the box. Handle is comfortable for two types of grip. It's a classic english type of handles that a best for woodcarving tool of this type (by our opinion).

  • lenght of handle  - 135mm (5.31inches)
  • total gouge lenght - 280mm (11.02inches)
  • handle made of cherrywood
  • oil coated

Produced by PETROGRAD toolworks in Saint-Petersburg Russia.

Straight Gouge Specifications:
Weight: 0.21 kg
Type: carving
Steel: 9ХС
Hardness: 59-61HRc
Handle material: cherry*
Handle lenght: 135 mm
Edge: straight
Sharpening angle: 25 degrees
Blade lenght: 145 mm
Blade width: 20 mm
Blade profile: N1
Total lenght: 280 mm
 
* material of handles may changes from batch to batch.
** coating oil may changes too
4900p(0) out of stock
Отзывов: 1
Рейтинг :

Straight Carving Chisel Rubankov, N1, 30mm (Allongee)

Straight Gouge Rubankov, N1, 30mm (1.18 inches)

Carving chisel "Rubankov" Straight Gouge N1, 30mm (1.18 inches). This is universal chisel that perfectly suits for carving hard and soft wood. The width of the cutting edge is 30mm ( 1.18 inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5150p(0) out of stock
Отзывов: 1
Рейтинг :

Petrograd Straight Carving Chisel , N1, 13mm, fishtail

A professional level cutting tool designed for processing hardwoods and hardwoods. The basis of any set of carving tools is straight chisels. Straight chisels "fish tail" (FT) are suitable for solving problems from creating curly shapes to the selection of lamps, allow you to work in hard-to-reach places where a regular straight chisel cannot handle. They can be used beveled up or down to create concave or convex surfaces.
RUBANKOV chisels are forged from low-alloy high-carbon steel. Hardened to a hardness of 59-61 HRc.
The faceted handle is made of precious wood and covered with oil. The impact side is rounded so as not to crush calluses on the palms. The brass ring has an exquisite look and the effect of the handle from cracking when working with a mallet. The internal profile of the chisel is polished, the detected edge is sharpened and ready for work.
These models are percussion, they can be paired with a mallet.
The declared geometric dimensions vary in handling, as the tool is made and hoarded by hand.
The length of the metal sheet is 145 mm. Overall length with handle 280mm.
Web width - 13mm.

Made at the PETROGRAD joinery and carpentry tools factory.
Production Russia.
4900p(0)
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N2, 40mm, 150mm

Стамеска для резьбы по дереву Петроградъ прямая N2, 40мм – это резчицкий инструмент профессионального уровня, предназначенный для резьбы по твердым и мягким породам древесины. Основа любого комплекта резчицкого инструмента – это прямые стамески. Прямые стамески подходит для множества задач от создания фигурных форм до подбора фона. Их можно использовать со скосом вниз или вверх для создания вогнутых или выпуклых поверхностей. Производство фабрика Петроградъ (Россия).
6430p(0) out of stock
Отзывов: 1
Рейтинг :

Straight Gouge Rubankov, N4, 18mm

Стамеска для резьбы Петроградъ прямая N4, 18 мм. Инструмент для резьбы по дереву профессионального уровня прекрасно работает по твердым и мягким породам древесины. Производство фабрика Петроградъ (Россия).

 

5390p(0) out of stock
Отзывов: 1
Рейтинг :
new

Petrograd Straight Gouge, N5, 8mm

Стамески для резьбы по дереву, ПЕТРОГРАДЪ, прямые N5 – это резчицкий инструмент профессионального уровня, предназначенный для резьбы по твердым и мягким породам древесины. Основа любого комплекта резчицкого инструмента – это прямые стамески. Прямые стамески подходит для множества задач от создания фигурных форм до подбора фона. Их можно использовать со скосом вниз или вверх для создания вогнутых или выпуклых поверхностей. Производство фабрика Петроградъ (Россия).

4850p(0)
Отзывов: 1
Рейтинг :
new

Straight Gouge Rubankov, N5, 8mm, fishtail, 150mm

Стамеска для резьбы по дереву, ПЕТРОГРАДЪ, прямая N5/FT, 8мм, рыбий хвост – это резчицкий инструмент профессионального уровня предназначен для резьбы по твердым и мягким породам древесины. Основа любого комплекта резчицкого инструмента, это прямые стамески. Прямые стамески fishtail (FT) подходит для множества задач от создания фигурных форм до подбора фона, позволяют работать в труднодоступных местах, там где не справится обычная прямая стамеска. Их можно использовать со скосом вниз или вверх для создания вогнутых или выпуклых поверхностей. Производство – фабрика Петроградъ (Россия).
4850p(0) out of stock
Отзывов: 1
Рейтинг :

Прямые стамески - страница 2

Видеоматериалы

youtube video

Нож для резьбы по дереву, ПЕТРОГРАДЪ, Богородский, 200мм/60мм

Нож резчицкий ПЕТРОГРАДЪ, Богородский, 190мм/60мм. Резчицкие ножи общего назначения, а также для большого удаления материала. Отличный нож как для начинающих так и для профессионалов. Все ножи заточены и готовы к работе.
Для выбора нужного ножа нажмите на название товара
2700p
Отзывов: 1
Рейтинг:

Нож для резьбы по дереву, ПЕТРОГРАДЪ, финский, 180мм/40мм

Резчицкие ножи с острым кончиком предназначены для деталировки и работы в труднодоступных местах. Длина лезвия 45мм или 60мм, скругленный обух. Угол заточки 23±2°. Удобная овальная рукоять из ценных пород древесины, покрыта маслом. Длина рукояти - 115мм. Отличный нож как для начинающих так и для профессионалов. Лезвие толщиной 2,5мм выполнено из высокоуглеродистой стали с закалкой до твердости 59-61 HRc. Все резцы заточены и готовы к работе. Производство Петроград (Россия).
Для выбора нужного ножа нажмите на название товара
2500p
Отзывов: 1
Рейтинг:

Резец для чекеринга C-1, 60° (одна РК)

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Резец для чекеринга C-1, 90° (одна РК)

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Топор кованый ПЕТРОГРАДЪ, модель Рославль 7, топорище н11, РК - сканди

Топор кованный походный с изогнутой рукоятью. Общая длина - 370 мм. Высота топора - 140 мм. Длина режущей кромки - 120 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 0,7 ± 0,05 кг. В комплекте кожаный чехол для защиты лезвия. Топорище выполнено из древесины клёна, длиной 320 мм. Топор отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для небольших плотницких и столярных работ и просто как универсальный топор. 

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

13000p
Отзывов: 1
Рейтинг:
new

Нож для резьбы по дереву, ПЕТРОГРАДЪ, Ложкорез, модель N1/22, левый

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3200p
Отзывов: 1
Рейтинг:
new

Нож для резьбы по дереву, ПЕТРОГРАДЪ, флажок 45град, 180мм/40мм

Нож для резьбы по дереву, ПЕТРОГРАДЪ, косая заточка 45град. Предназначен для широкого спектра работ. Рукоять выполнена из ясеня, угол скоса 45 градусов, инструментальная сталь. Производство фабрика Петроградъ (Россия).

2500p
Отзывов: 1
Рейтинг:

Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм

Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм. Стамески спроектированы, ориентируясь на многолетний опыт мастеров-краснодеревщиков. Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при подрезке и подчитки шиповых соединений: ласточкин хвост, шип-проушина, впол дерева, сковородней и прочие. Производятся с различной шириной полотна от 3мм до 26мм. Толщина лезвия переменная и увеличивается от режущей кромки к рукояти. Производство фабрика Петроградъ (Россия)

3300p
Отзывов: 1
Рейтинг:
new%

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25. Отличается от других топоров удлиненной режущей кромкой. Благодаря этой особенности топор можно брать близким к полотну хватом и не бояться поранить руку при работе. Такой хват очень удобен при тёске и ошкуривании бревен. Удлиненная рукоять позволяет без лишних усилий рубить ветки и сучья. Производство фабрика Петроградъ (Россия).

15000p
Отзывов: 1
Рейтинг:
new

Масло камелии, KAPLEUM, Лаванда, 60 мл.

Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.

 

720p
Отзывов: 1
Рейтинг: