Cutting knife PETROGRAD, Bogorodskij type, double bevel

Нож ремесленный ПЕТРОГРАДЪ, богородский тип, двусторонняя заточка. Нож универсальный ремесленный, который поможет вам в решении многих задач. Применяется при разметке, грубом съеме материала, при роспуске шпона и выполнении резчицких элементов декора. Длина клинка 80мм, незначительно может варьироваться.

Производство - фабрика столярных и плотницких инструментов 
Сделано в России

3600p(55.37)
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, double bevel 30 deg, 20mm/167mm

Knives jambs with a bevel angle of 30 degrees.

The blade length is shown in the table, the blade thickness is about 2 mm. The blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel hardened of 59-61 HRc. Convenient rectangular handle of sapele soaked with oil. Sharpened and ready to go. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, veneering, working with leather, producing musical instruments, modeling and in everyday life).

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

item code sharpening, deg width, mm length, mm thickness, mm
М00013992 left-sided 20 180 2
М00013991 right-sided 20 180 2
М00013993 double-sided 20 180 2
3600p(55.37)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, left-handed skew 30 deg

Knives jambs with a bevel angle of 30 degrees.

The blade length is shown in the table, the blade thickness is about 2 mm. The blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel hardened of 59-61 HRc. Convenient rectangular handle of sapele soaked with oil. Sharpened and ready to go. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, veneering, working with leather, producing musical instruments, modeling and in everyday life).

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

3600p(55.37)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, right-handed skew 30 deg, 20mm/167mm

Knives jambs with a bevel angle of 30 degrees.

The blade length is shown in the table, the blade thickness is about 2 mm. The blade is made of 65G (Germany 66Mn4, Ck67, USA 1066) steel hardened of 59-61 HRc. Convenient rectangular handle of sapele soaked with oil. Sharpened and ready to go. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, veneering, working with leather, producing musical instruments, modeling and in everyday life).

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

item code sharpening, deg width, mm length, mm thickness, mm
М00013992 left-sided 20 180 2
М00013991 right-sided 20 180 2
М00013993 double-sided 20 180 2
3600p(55.37)
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, double bevel 60 deg, 20mm/187mm

Handicraft knife PETROGRAD, oblique sharpening 60 degrees, 20mm / 162mm, universal. The length of the blade is shown in the table, the thickness of the blade is about 2 mm. The blade is made of high-carbon tool steel, hardened to a hardness of 59-61 HRc.

Production - factory of joinery and carpentry tools PETROGRAD. Made in Russia
3600p(55.37)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, left-handed skew 60 deg, 20mm/187mm

Handicraft knife PETROGRAD, oblique sharpening 60 degrees, 20mm / 162mm, left. The length of the blade is shown in the table, the thickness of the blade is about 2 mm. The blade is made of high-carbon tool steel, hardened to a hardness of 59-61 HRc.

Production - factory of joinery and carpentry tools PETROGRAD. Made in Russia
3600p(55.37)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, right-handed skew 60 deg, 20mm/187mm

Handicraft knife PETROGRAD, oblique sharpening 60 degrees, 20mm / 162mm, right. The length of the blade is shown in the table, the thickness of the blade is about 2 mm. The blade is made of high-carbon tool steel, hardened to a hardness of 59-61 HRc.

Production - factory of joinery and carpentry tools PETROGRAD. Made in Russia
3600p(55.37)
Отзывов: 1
Рейтинг :
%

Cutting knife PETROGRAD, Roman type, 200mm, right bevel

Ножи ремесленные ПЕТРОГРАДЪ, римский тип, 200мм. Топорик, шорный нож правый.
Нож шорный предназначен для раскроя и шерфование кожи. Mожно использовать как для фигурного реза, так и для прямолинейного торцевания кожи.
Ножи топорики римский тип имеют несколько вариантов использоавния
- раскрой и шерфование кожи
- в сочетании с линейкой можно использовать для нарезания полос
- хорошо режет толстую кожу и склейку
- позволяет делать прямолинейный раскрой на коже любой толщины.


Длина полная 200 мм.
Длина режущей части 75 мм.
Толщина 6 мм.

1150p(17.69)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, Swedish type

Knife craft PETROGRAD, Swedish type, bilateral sharpening. Well cope with many tasks, from domestic to hunting. Made from low alloy tool steel. A knife with a traditional geometric shape of the blade has a double-sided sharpening. It does an excellent job with almost all tasks, a particularly popular knife among tourists, as it will easily cut meat or prepare wood for a fire. It can be easily sharpened on the go.

Blade length - 85mm.
Thickness 2mm.
The total length of the knife is 190mm.
Hardened to a hardness of 59-61 HRc.

Production - joinery and carpentry tools factory
Made in Russia
3600p(55.37)
Отзывов: 1
Рейтинг :
%

Leather belt sheath for craft knives PETROGRAD

Case for craft knives PETROGRAD, with hanger. The scabbard is made of high quality leather 2 mm thick and riveted. The hanger for the belt is also attached with 2 rivets, loop height 40mm. The size of the cover with suspension: length - 200mm, width - 50mm, thickness - 25mm. Suitable for knives up to 150mm long and 30mm wide. The knife is not included in the kit.

Factory production Petrograd

1600p(24.61)
Отзывов: 1
Рейтинг :
new%

Cutting knife PETROGRAD skew 30 deg, 16mm

Ножи ремесленные ПЕТРОГРАДЪ 16мм, косые, двухсторонняя заточка – это компактные и очень острые ремесленные ножи. Применяется при разметке, грубом съеме материала, при роспуске шпона и выполнении резчицких элементов декора. Производство фабрика Петроградъ (Россия).

2500p(38.45)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, Blue whale

Нож ремесленный ПЕТРОГРАДЪ, Кит – авторская работа мастера Александра Савина, инструмент ручной работы, предназначенный для обработки кожи и разметки древесины. Форма ножа имеет силуэт кита, инструмент дополнен гравировкой, выполненной методом аброна. Технологический процесс включает закалку, чернение и тонкую шлифовку поверхности. Нож имеет одностороннюю заточку.

25850p(397.57)
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, double bevel 20 deg, 20mm/163mm

Cutting knife PETROGRAD with a skew of 20 degrees. The knife jamb is one of the most versatile cutting tools used for marking, rough material removal, veneer dissolution and carving of decorative elements.

The blade thickness is about 2 mm. The blade is made of 65G steel (Germany 66Mn4, Ck67, USA 1066) hardened to 59-61 HRc. Comfortable maple rectangular handle with bevels soaked with oil. Knife jamb sharpened and ready to go. Sharpening angle  25 degrees. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, plywood, working with leather, producing musical instruments, modeling and in everyday life).

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

3600p(55.37)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, left-handed skew 20 deg,

Cutting knife PETROGRAD with a skew of 20 degrees. The knife jamb is one of the most versatile cutting tools used for marking, rough material removal, veneer dissolution and carving of decorative elements.

The blade thickness is about 2 mm. The blade is made of 65G steel (Germany 66Mn4, Ck67, USA 1066) hardened to 59-61 HRc. Comfortable maple rectangular handle with bevels soaked with oil. Knife jamb sharpened and ready to go. Sharpening angle  25 degrees. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, plywood, working with leather, producing musical instruments, modeling and in everyday life).

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

3600p(55.37)
Отзывов: 1
Рейтинг :
%

Cutting knife PETROGRAD, right-handed skew 20 deg

Cutting knife PETROGRAD with a skew of 20 degrees. The knife jamb is one of the most versatile cutting tools used for marking, rough material removal, veneer dissolution and carving of decorative elements.

The blade thickness is about 2 mm. The blade is made of 65G steel (Germany 66Mn4, Ck67, USA 1066) hardened to 59-61 HRc. Comfortable maple rectangular handle with bevels soaked with oil. Knife jamb sharpened and ready to go. Sharpening angle  25 degrees. Knives with a slanting sharpening have a wide range of applications (carving, marking, working with cardboard, marquetry, intarsia, plywood, working with leather, producing musical instruments, modeling and in everyday life).

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

3600p(55.37) 2 900 p
Отзывов: 1
Рейтинг :

Cutting knife PETROGRAD, Novgorodskij type, double bevel

Нож ремесленный ПЕТРОГРАДЪ, новгородский тип – классический ремесленный нож, клинок которого выполнен по мотивам древних новгородских ножей. Производство фабрика Петроградъ (Россия).

3600p(55.37)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, Roma type, double bevel

Универсальный ремесленный нож. Для разработки формы клинка взяты за основу изображения бытовых ножей, встречающихся при археологических раскопках на территории Апеннин и Балкан. На фабрике ПЕТРОГРАДЪ ранее производились несколько моделей таких ножей, но в 2023 году их выпуск был прекращён. Выпущенный в 2024 году нож отличается от предыдущих моделей более длинным клинком и наличием накладок на рукояти. Кроме того, римский нож, как и остальные ножи ремесленной серии, комплектуется удобным кожаным чехлом. Производство – фабрика Петроградъ (Россия).

3600p(55.37)
Отзывов: 1
Рейтинг :
new

Cutting knife PETROGRAD, Roman type, 160mm, double bevel

Нож ремесленный ПЕТРОГРАДЪ, римский тип, 160мм. скелетный (без накладок). Это универсальный нож, может быть применен практически в любом ремесле. Нож выполнен из стали 9ХС. Заточка двухсторонняя. Производство – фабрика Петроградъ (Россия).

Характеристики ножа:

  • Сталь: 9ХС
  • Закалка: 60-61 HRc
  • Угол заточки: 20 градусов
  • Длина режущей кромки: 60 мм
  • Общая длина: 160 мм
  • Тип заточки: прямая
  • Масса: 250 грамм
  • В комплекте кожаный чехол на режущую кромку
2000p(30.76)
Отзывов: 1
Рейтинг :
%

Cutting knife PETROGRAD, Roman type, 160mm, left bevel

Нож ремесленный ПЕТРОГРАДЪ, римский тип, 160мм, левая заточка. Топорик, шорный нож левый.
Нож шорный предназначен для раскроя и шерфование кожи. Mожно использовать как для фигурного реза, так и для прямолинейного торцевания кожи.

Длина полная 160 мм.
Длина режущей части 57 мм.
Толщина 3 мм.

Производство фабрики Петроградъ

1000p(15.38)
Отзывов: 1
Рейтинг :
new

Нож ремесленный ПЕТРОГРАДЪ, юрьевский тип (флажок)

Нож ремесленный ПЕТРОГРАДЪ, юрьевский тип (флажок). Предназначен для работ по резьбе по дереву в стиле знаменитого резчика Адольфа Юрьева, разрабатывающего дизайн инструментов для компании Stryi. Производство фабрика Петроградъ (Россия).

3600p(55.37)
Отзывов: 1
Рейтинг :

Ремесленные ножи

Carving knife PETROGRAD, Finnish type, 200mm/60mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
 
2500p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N2

The set includes:

Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 175mm/60mm
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving chisel, PETROGRAD, 10mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives

The tools are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles made of beech and maple covered with tung oil.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

15000p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, right-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The right version of knife is designed to work with the right hand towards yourself or left hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: right-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg

*coating may change from batch to batch

3600p
Отзывов: 1
Рейтинг:

Checkering set, type N3, 90°/18lines, 10 tools + gauge, in roll bag

Full tool set for checkering N3 (90 degrees, 18 lines) includes 10 tools  for making checkers on wood. Gouges by Petrograd toolsworks for making checkers. This is most full set of tools for making checkers a on rifle handles. Gouges with 90 degree cutters in this set are making more sharp checkers that grants great grip and less prone to clogging than flat ones.

Set number 3 includes:

  • gouge B-2 ( two cutting edges, spacer with tooths )
  • gouge S-1 ( one cutting edge )
  • gouge N2-18, 90° ( two cutting edges )
  • gouge N3-18, 90° ( right router, left cutting edges )
  • gouge N4-18, 90° ( left router, right cutting edges )
  • gouge C-1, 90° ( one cutting edge )
  • gouge L- 9, 90° ( right router with wide space, left cutting edge )
  • gouge R- 9, 90° ( left router with wide space, right cutting edge )
  • gouge for corners 90° (or Carving chisel, PETROGRAD, V-type, 90 degrees)
  • gouge for marking rifle handles
  • checkering guage
  • roll bag for carving tools model N1 ( 12 pockets )
Checkering is a type of woodcarving and decorating handles of knives, rifles. This gouges was based on our expirience of use the variety of worldwide know gouges. Model line includes all base gouges from 16 to 32 lines per inch with angles about 60 and 90 dergrees. All gouges blades can be replaced on new ones and can be purchased separately.

Checkering tool set by Petrograd toolworks. Made in Saint-Petersburg Russia.

Number of tools: 10 tools
Type of checkers: 90 degrees
Number of lines: 18 lines on 1 inch
Handle material: Beech*
Handle lenght: 120 mm
Total lenght: 240 mm
Total weight: 0.55 kg

  1. Checkering tool S-1 has 1 pyramidal tooth. Angle of the top is 90 degrees. The cutter has a convenient beech handle and a rod with a sharp bend perpendicular to the cutting axis and the working part installed on it. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
    It is V-shaped with teeth on both sides. Designed to handle corners and bends, as well as hard-to-reach places.
    Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
    The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Every element is smooth and beautiful.
    The width of the working part is 5 mm, the length of the working part is 5 mm, the apex angle is 90 °
  2. Checkering tool N2-18. Both sides with 18 teeth per inch. Used for the application of grooves and their deepening after application. One blade runs along the guideline, while the other marks the next groove. When moving to the next groove, the tool deepens it and again applies the next groove. Cutter 2 It is a combination of tools for expanding and deepening grooves. Beech handle. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work.
  3. Checkering tool B-2, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained. Maximum roller height 1 mm, width 2.5 mm
  4. Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with 18 teeth per inch. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle.
  5. Checkering tools from series N4 have two sides: the right side with 18 teeth per inch, the left - smooth, is used as a guide. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The left blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The right blade has teeth and cuts a new groove during the process of notching from left to right. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle
  6. Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work. It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters. The wooden handle is made of beech, well balanced and lies comfortably in your hand. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods. The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained. The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees
10290p
Отзывов: 1
Рейтинг:

Axe Anika, model Tomohawk

Топор Аника, Томагавк, с чехлом. Ультра-легкий топор Томагавк с обухом-молотком. Идеальный инструмент для передвижений налегке и хозяйственной деятельности в лесу. Заточка с микроподводом для работ по сухой и сырой древесине. Вес головы — около 600 грамм. Вес топора — около 800 грамм. Общая длина — 400-450 мм.
9600p
Отзывов: 1
Рейтинг:

Petrograd Swan Neck Gouge, n7, 30mm

Стамеска-ложкорез ПЕТРОГРАДЪ, клюкарза Swan Neck, н7,30мм – это прекрасный инструмент, позволяющий без особых усилий выбирать материал, при создании деревянных чаш, кукс и ложек. Эта стамеска выкована вручную из стали 9ХС и закалена до 61 HRc. Производство фабрика Петроградъ (Россия).

5700p
Отзывов: 1
Рейтинг:
new

Carving knife PETROGRAD, Axe type, 32mm / 60 degree

Резец-топорик для резьбы по дереву, ПЕТРОГРАДЪ, 32 мм / 60 градусов является частью новой линейки ножей для резьба по дереву Петроградъ. Этот нож основан на резцах-топориках мастера-резчика Адольфа Юрьева. Производство фабрика Петроградъ (Россия).

2200p
Отзывов: 1
Рейтинг:
new

PETROGRAD axe, model Bryansk, handle n9

Топор походный ПЕТРОГРАДЪ, модель Брянск, топорище н9. Предназначен для выполнения бытовых задач: колка дров, подтес колышков и небольших бревен, а также многих других задач. Выкован вручную из стали 65Г, закален до 58-59 HRc. Производство фабрика Петроградъ (Россия).

 

10700p
Отзывов: 1
Рейтинг:
new

Cabinetmaking Corner Chisel, PETROGRAD, without handle

Долото столярное ПЕТРОГРАДЪ, угловое, без рукояти. Специально разработано для того, чтобы легко и быстро вырезать углы (например при установке петель). Ширина режущей кромки составляет 10 мм. Долото выполнено из инструментальной стали. Поставляется с кожаным чехлом. Производство – фабрика Петроградъ (Россия).

3850p
Отзывов: 1
Рейтинг:
new

Bevel edge chisel, PETROGRAD, model Volga, impact type, 16mm

Стамеска ПЕТРОГРАДЪ, серия Волга, ударная, 16 мм. Это усовершенствованная версия классической столярной стамески серии Волга. Представленная стамеска оснащена дополнительным кольцом на рукояти, обеспечивающим возможность ударной работы. Производство – фабрика Петроградъ (Россия).

3600p
Отзывов: 1
Рейтинг: