1. Main
  2. Выведено из продажи

Bench chisel PETROGRAD 20 mm

Bench chisel PETROGRAD. The length of the blade 120mm; width - 20mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Bench chisel PETROGRAD 20 mm
1740p(26.76)
Отзывов: 1
Рейтинг :

Bench chisel PETROGRAD 26 mm

Bench chisel PETROGRAD. The length of the blade 120mm; width - 26mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Bench chisel PETROGRAD 26 mm
2650p(40.76)
Отзывов: 1
Рейтинг :

Bench chisel PETROGRAD 32 mm

Bench chisel PETROGRAD. The length of the blade 120mm; width - 32mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Bench chisel PETROGRAD 32 mm
3180p(48.91)
Отзывов: 1
Рейтинг :

Bench chisel PETROGRAD 40 mm

Bench chisel PETROGRAD. The length of the blade 120mm; width - 40mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Bench chisel PETROGRAD 40 mm
2610p(40.14) 3 020 p
Отзывов: 1
Рейтинг :
%

Bench chisel PETROGRAD 50 mm

Bench chisel PETROGRAD. The length of the blade 120mm; width - 50mm. Overall length 250mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Bench chisel PETROGRAD 50 mm
3410p(52.45) 3 950 p
Отзывов: 1
Рейтинг :

Set of bench chisels, in tool roll, 4 pcs (6,12,20,26 mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 12mm, 20mm, 26mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Set of bench chisels, in tool roll, 4 pcs (6,12,20,26 mm)
9910p(152.42)
Отзывов: 1
Рейтинг :

Set of bench chisels , in tool roll, 4 pcs (8,10,16,32 mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 8mm, 10mm, 16mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Set of bench chisels , in tool roll, 4 pcs (8,10,16,32 mm)
6880p(105.81)
Отзывов: 1
Рейтинг :

Set of bench chisels, in tool roll, 6 pcs (6,8,10,12,20,32 mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm, 12mm, 20mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Set of bench chisels, in tool roll, 6 pcs (6,8,10,12,20,32 mm)
9700p(149.19)
Отзывов: 1
Рейтинг :

Set of bench chisels , in tool roll, 8 pcs (6,8,10,12,16,20,26,32mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 26mm, 32mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Set of bench chisels , in tool roll, 8 pcs (6,8,10,12,16,20,26,32mm)
14600p(224.55)
Отзывов: 1
Рейтинг :

Set of bench chisels, in tool roll, 10 pcs (6,8,10,12,16,20,26,32,40,50mm)

Set of bench chisels PETROGRAD. The length of the blade - from 120mm to 160mm; width - 6mm, 8mm, 10mm,12mm, 16mm, 20mm, 26mm, 32mm, 40mm, 50mm. Overall length - from 250mm to 295mm.These chisels have a classic design with blades that are bevel-edged to a narrow land on each side, providing excellent clearance when trimming into an angled corner such as in dovetail work, as well as reducing sidewall friction when working in a tight recess. Chisels are made focusing on the experience of old masters of woodworking. The blade is made of high-alloyed chrome-manganese steel and hardened to 60HRc. Comfortable hornbeam handle. The handle at the junction with the blade reinforced brass ring with leather gasket. 

More info about Set of bench chisels, in tool roll, 10 pcs (6,8,10,12,16,20,26,32,40,50mm)
17920p(275.61)
Отзывов: 1
Рейтинг :

Butt chisel PETROGRAD 6 mm

Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag.

More info about Butt chisel PETROGRAD 6 mm
1400p(21.53) 1 620 p
Отзывов: 1
Рейтинг :

Butt chisel PETROGRAD 12 mm

Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag.

More info about Butt chisel PETROGRAD 12 mm
1290p(19.84)
Отзывов: 1
Рейтинг :

Butt chisel PETROGRAD 20 mm

Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag

More info about Butt chisel PETROGRAD 20 mm
1470p(22.61) 1 710 p
Отзывов: 1
Рейтинг :

Butt chisel PETROGRAD 26 mm

Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag

More info about Butt chisel PETROGRAD 26 mm
2190p(33.68)
Отзывов: 1
Рейтинг :

Set of butt chisels PETROGRAD, in tool roll, 4 pcs (6,16,20,26 mm)

Set of butt chisels PETROGRAD, in tool roll, 4 pcs (6,16,20,26 mm). Short chisels PETROGRAD are ideal for precision work, for example in the manufacture of finger joints. Blade length - 95mm; width - 6mm, 12mm, 20mm, 26mm,. Total length - from 200mm. Chisels are specially made focusing on the experience of old masters of carpentry. The blade is made of high-alloy chrome-manganese tool steel and hardened to 60HRc. The edges of the web are chamfered towards the edges, but at the same time the edges of the web have a constant thickness. This design allows you to work comfortably in hard to reach places and especially with dovetail connections. The handle is made of hornbeam wood, the size of the handle is 105x30mm. Uncoated handle - the craftsman chooses the finish himself. The handle at the junction with the blade is reinforced with a brass ring with a leather pad There is also a set of chisels in a twist bag

More info about Set of butt chisels PETROGRAD, in tool roll, 4 pcs (6,16,20,26 mm)
5700p(87.67)
Отзывов: 1
Рейтинг :

Skew chisel PETROGRAD, left-sided, 6mm

Skew chisel PETROGRAD. The angle of inclination of the cutting edge to the chisel axis is 30 degrees. The length of the blade - 130mm; width - 6mm. Overall length 265mm. The blade is made of high-alloyed chrome-manganese tool steel and hardened to 60HRc. The handle is made of hornbeam wood. Included - plastic tip to protect the cutting edge. The handle at the junction with the blade reinforced brass ring with leather gasket.

More info about Skew chisel PETROGRAD, left-sided, 6mm
1410p(21.69) 1 630 p
Отзывов: 1
Рейтинг :
%

Skew chisel PETROGRAD, left-sided, 12mm

Skew chisel PETROGRAD. The angle of inclination of the cutting edge to the chisel axis is 30 degrees. The length of the blade - 130mm; width - 12mm. Overall length 265mm. The blade is made of high-alloyed chrome-manganese tool steel and hardened to 60HRc. The handle is made of hornbeam wood. Included - plastic tip to protect the cutting edge. The handle at the junction with the blade reinforced brass ring with leather gasket.

More info about Skew chisel PETROGRAD, left-sided, 12mm
1410p(21.69) 1 630 p
Отзывов: 1
Рейтинг :

Skew chisel PETROGRAD, right-sided, 6mm

Skew chisel PETROGRAD. The angle of inclination of the cutting edge to the chisel axis is 30 degrees. The length of the blade - 130mm; width - 6mm. Overall length 265mm. The blade is made of high-alloyed chrome-manganese tool steel and hardened to 60HRc. The handle is made of hornbeam wood. Included - plastic tip to protect the cutting edge. The handle at the junction with the blade reinforced brass ring with leather gasket.

More info about Skew chisel PETROGRAD, right-sided, 6mm
1410p(21.69) 1 630 p
Отзывов: 1
Рейтинг :

Skew chisel PETROGRAD, right-sided, 12mm

Skew chisel PETROGRAD. The angle of inclination of the cutting edge to the chisel axis is 30 degrees. The length of the blade - 130mm; width - 12mm. Overall length 265mm. The blade is made of high-alloyed chrome-manganese tool steel and hardened to 60HRc. The handle is made of hornbeam wood. Included - plastic tip to protect the cutting edge. The handle at the junction with the blade reinforced brass ring with leather gasket.

More info about Skew chisel PETROGRAD, right-sided, 12mm
1930p(29.68)
Отзывов: 1
Рейтинг :
%

Skew chisel PETROGRAD, right-sided, 20mm

Skew chisel PETROGRAD. The angle of inclination of the cutting edge to the chisel axis is 30 degrees. The length of the blade - 130mm; width - 20mm. Overall length 265mm. The blade is made of high-alloyed chrome-manganese tool steel and hardened to 60HRc. The handle is made of hornbeam wood. Included - plastic tip to protect the cutting edge. The handle at the junction with the blade reinforced brass ring with leather gasket.

More info about Skew chisel PETROGRAD, right-sided, 20mm
1470p(22.61) 1 710 p
Отзывов: 1
Рейтинг :

Выведено из продажи

Popular goods

Checkering set, type N3, 90°/18lines, 10 tools + gauge, in roll bag

Checkering set, type N3, 90°/18lines, 10 tools + gauge, in roll bag

Full tool set for checkering N3 (90 degrees, 18 lines) includes 10 tools  for making checkers on wood. Gouges by Petrograd toolsworks for making checkers. This is most full set of tools for making checkers a on rifle handles. Gouges with 90 degree cutters in this set are making more sharp checkers that grants great grip and less prone to clogging than flat ones.

Set number 3 includes:

  • gouge B-2 ( two cutting edges, spacer with tooths )
  • gouge S-1 ( one cutting edge )
  • gouge N2-18, 90° ( two cutting edges )
  • gouge N3-18, 90° ( right router, left cutting edges )
  • gouge N4-18, 90° ( left router, right cutting edges )
  • gouge C-1, 90° ( one cutting edge )
  • gouge L- 9, 90° ( right router with wide space, left cutting edge )
  • gouge R- 9, 90° ( left router with wide space, right cutting edge )
  • gouge for corners 90° (or Carving chisel, PETROGRAD, V-type, 90 degrees)
  • gouge for marking rifle handles
  • checkering guage
  • roll bag for carving tools model N1 ( 12 pockets )
Checkering is a type of woodcarving and decorating handles of knives, rifles. This gouges was based on our expirience of use the variety of worldwide know gouges. Model line includes all base gouges from 16 to 32 lines per inch with angles about 60 and 90 dergrees. All gouges blades can be replaced on new ones and can be purchased separately.

Checkering tool set by Petrograd toolworks. Made in Saint-Petersburg Russia.

Number of tools: 10 tools
Type of checkers: 90 degrees
Number of lines: 18 lines on 1 inch
Handle material: Beech*
Handle lenght: 120 mm
Total lenght: 240 mm
Total weight: 0.55 kg

  1. Checkering tool S-1 has 1 pyramidal tooth. Angle of the top is 90 degrees. The cutter has a convenient beech handle and a rod with a sharp bend perpendicular to the cutting axis and the working part installed on it. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work.
    It is V-shaped with teeth on both sides. Designed to handle corners and bends, as well as hard-to-reach places.
    Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.
    The cutter has not matter what cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Every element is smooth and beautiful.
    The width of the working part is 5 mm, the length of the working part is 5 mm, the apex angle is 90 °
  2. Checkering tool N2-18. Both sides with 18 teeth per inch. Used for the application of grooves and their deepening after application. One blade runs along the guideline, while the other marks the next groove. When moving to the next groove, the tool deepens it and again applies the next groove. Cutter 2 It is a combination of tools for expanding and deepening grooves. Beech handle. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work.
  3. Checkering tool B-2, is a 2 conical cutter with a working angle of 90 degrees, separated by a wide groove with teeth. A tool for making the roller around the notch. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods.A cutter is just the same as cutting deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Smoothly each groove is obtained. Maximum roller height 1 mm, width 2.5 mm
  4. Checkering tools from series N3, have two sides: the right side is smooth, used as a guide, the left - with 18 teeth per inch. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The right blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The left blade has teeth and cuts a new groove during the process of notching from right to left. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle.
  5. Checkering tools from series N4 have two sides: the right side with 18 teeth per inch, the left - smooth, is used as a guide. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work. The left blade is devoid of teeth, has a sharp and smooth shape, and exactly follows along the guide line. The right blade has teeth and cuts a new groove during the process of notching from left to right. Thus, it is possible to apply a notch, using the previous groove, as a guide. Beech handle
  6. Checkering tool C-1 has 1 pyramidal tooth. Angle top 90 degrees. All the cutters are made of steel, undergone the process of hardening and processing, for long and reliable work. It is V-shaped with teeth on both sides. Checkering tool C-1 is designed for applying the original layout of the picture, as well as for deepening the grooves after their application, with other cutters. The wooden handle is made of beech, well balanced and lies comfortably in your hand. Pay attention to the high relief, providing fast and smooth cutting. The tines provide good removal of all hardwoods. The cutter doesnt look like cutting - deep or shallow grooves, right or rounded corners, parallel lines or cross-hatching, in the direction of the fiber or across. No need to re-do the pass to treat uneven areas. Equal each element is obtained. The width of the working part is 5 mm, the length of the working part is 11 mm, the apex angle 90 degrees
More info about Checkering set, type N3, 90°/18lines, 10 tools + gauge, in roll bag
10290p
Отзывов: 1
Рейтинг:
Axe Anika, model Tomohawk

Axe Anika, model Tomohawk

Топор Аника, Томагавк, с чехлом. Ультра-легкий топор Томагавк с обухом-молотком. Идеальный инструмент для передвижений налегке и хозяйственной деятельности в лесу. Заточка с микроподводом для работ по сухой и сырой древесине. Вес головы — около 600 грамм. Вес топора — около 800 грамм. Общая длина — 400-450 мм.
More info about Axe Anika, model Tomohawk
9600p
Отзывов: 1
Рейтинг:
new
PETROGRAD axe, model Bryansk, handle n9

PETROGRAD axe, model Bryansk, handle n9

Топор походный ПЕТРОГРАДЪ, модель Брянск, топорище н9. Предназначен для выполнения бытовых задач: колка дров, подтес колышков и небольших бревен, а также многих других задач. Выкован вручную из стали 65Г, закален до 58-59 HRc. Производство фабрика Петроградъ (Россия).

 

More info about PETROGRAD axe, model Bryansk, handle n9
10700p
Отзывов: 1
Рейтинг:
new
Cabinetmaking Corner Chisel, PETROGRAD, without handle

Cabinetmaking Corner Chisel, PETROGRAD, without handle

Долото столярное ПЕТРОГРАДЪ, угловое, без рукояти. Специально разработано для того, чтобы легко и быстро вырезать углы (например при установке петель). Ширина режущей кромки составляет 10 мм. Долото выполнено из инструментальной стали. Поставляется с кожаным чехлом. Производство – фабрика Петроградъ (Россия).

More info about Cabinetmaking Corner Chisel, PETROGRAD, without handle
3850p
Отзывов: 1
Рейтинг:
new
Книга

Книга "Зодчие Русского Севера"

Миссия книги – изучение и популяризация истории Русского Севера, воплощённой в культурном ландшафте, неотъемлемой частью которого является уникальное деревянное зодчество. Представлены новые исторические и этнографические иллюстрации, памятники деревянной архитектуры, обмеры, которые ранее не были опубликованы. Некоторые из сооружений утрачены и известны лишь по рисункам и фотографиям, многие сохранились и сняты в 2023 г. специально для книги. Это памятники Архангельской, Ленинградской, Мурманской областей и Карелии. Создатели книги хотят привлечь внимание к ветшающим деревянным памятникам, которые еще могут быть спасены – законсервированы и отреставрированы.
More info about Книга "Зодчие Русского Севера"
3400p
Отзывов: 1
Рейтинг:
new
Bevel edge chisel, PETROGRAD, model Volga, impact type, 16mm

Bevel edge chisel, PETROGRAD, model Volga, impact type, 16mm

Стамеска ПЕТРОГРАДЪ, серия Волга, ударная, 16 мм. Это усовершенствованная версия классической столярной стамески серии Волга. Представленная стамеска оснащена дополнительным кольцом на рукояти, обеспечивающим возможность ударной работы. Производство – фабрика Петроградъ (Россия).

More info about Bevel edge chisel, PETROGRAD, model Volga, impact type, 16mm
3600p
Отзывов: 1
Рейтинг:
new
Bevel edge chisel, PETROGRAD, model Volga, impact type, 8mm

Bevel edge chisel, PETROGRAD, model Volga, impact type, 8mm

Стамеска ПЕТРОГРАДЪ, серия Волга, ударная, 8 мм . Это усовершенствованная версия классической столярной стамески серии Волга. Представленная стамеска оснащена дополнительным кольцом на рукояти, обеспечивающим возможность ударной работы. Производство – фабрика Петроградъ (Россия).
More info about Bevel edge chisel, PETROGRAD, model Volga, impact type, 8mm
3400p
Отзывов: 1
Рейтинг: