Chernigov X axe head

Отков головы топора ПЕТРОГРАДЪ, Чернигов Х. Высота топора - 105 мм. Длина режущей кромки - 105 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 0,650кг. В комплекте кожаный чехол для защиты лезвия. Топор отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для небольших плотницких и столярных работ и просто как универсальный топор. 

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

7500p(115.35)
Отзывов: 1
Рейтинг :

Roslavl 5 axe head

Отков головы топора ПЕТРОГРАДЪ, Рославль V. Высота топора - 130 мм. Длина режущей кромки - 90 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 570 ± 10г. В комплекте кожаный чехол для защиты лезвия. Топор отлично подойдет для огромного вида работ, как походный топор, для небольших плотницких и столярных работ и просто как универсальный топор. 

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

8500p(130.73) out of stock
Отзывов: 1
Рейтинг :

Zvenigorod IX axe head

The head of an ax PETROGRAD, Zvenigorod IX. Cutting edge length 120 mm. Weight 800 g. Supplied with a leather case. The ax is made of tool steel. The ax is hardened to 58-60 HRc. Forging by hand can significantly increase strength. Production - factory of joinery and carpentry tools PETROGRAD.

It is recommended to purchase the PETROGRAD # 5 ax handle for this ax.

Made in Russia

9000p(138.42)
Отзывов: 1
Рейтинг :

Zvenigorod VII axe head

Head of wood carving axe Zvenigorod VII . Head of this axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

  • Blade width 125 mm
  • Head height 145 mm
  • Sharpening angle - 30 degrees
  • Hardness - 55-58HRc
  • Weight - 0,53 kg

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe head for Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

Head weight: 0.53 kg
Type: Carving hatchet
Steel: 65Г
Hardness: 55-58HRc
Handle lenght: 350 mm
Edge: Curved
Sharpening angle: 30 degrees
Blade lenght: 125 mm
9500p(146.11)
Отзывов: 1
Рейтинг :

Roslavl 10 axe head

Отков головы топора ПЕТРОГРАДЪ, Рославль X. Высота топора - 185 мм. Длина режущей кромки - 160 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 0,95 кг. 

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России.

12500p(192.25)
Отзывов: 1
Рейтинг :

Roslavl 7 axe head

Отков головы топора ПЕТРОГРАДЪ, Рославль VII. Высота топора - 140 мм. Длина режущей кромки - 120 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 0,60 ± 0,05 кг. В комплекте кожаный чехол для защиты лезвия. Подойдет для огромного вида работ, как походный топор, для небольших плотницких и столярных работ и просто как универсальный топор. 

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

9500p(146.11)
Отзывов: 1
Рейтинг :
new

Bryansk VII axe head

Голова топора ПЕТРОГРАДЪ, модель Брянск, V-заточка. Используется для собственноручного изготовления "валочного топора" в стиле канадских лесорубов. Подойдет так же для колки и подтески. Благодаря линзовидной заточке, режущая кромка имеет повышенную износостойкость. Производство фабрика Петроградъ (Россия)

9000p(138.42)
Отзывов: 1
Рейтинг :
new

Semeonov axe head

Голова топора ПЕТРОГРАДЪ, модель Семёнов. Топор создан по мотивам английских топоров так называемого кентского типа. В музее Старинных инструментов хранится несколько образцов. Ручная ковка и индивидуальный подход к изготовлению каждого топора позволяет нам гарантировать его остроту и надежность

8500p(130.73)
Отзывов: 1
Рейтинг :

Polotsk 8I axe head

The head of an ax PETROGRAD, Polotsk VIII. The height of the ax is 155 mm. The length of the cutting edge is 105 mm. The ax is forged by hand from 65G steel. Sharpening straight. Total weight - 0.65kg. Includes leather case. The ax is perfect for a huge type of work, for carpentry and joinery and a versatile ax.

For this ax it is recommended to purchase a replaceable hatchet PETROGRAD No. 11.

Production - factory of joinery and carpentry tools PETROGRAD.

Made in Russia

10500p(161.49)
Отзывов: 1
Рейтинг :
new

Mozhaisk axe head

Голова топора ПЕТРОГРАДЪ, модель Можайск. Выкована вручную из стали 65Г. Закалена до 58 HRc. Комплектуется кожаным чехлом. Производство фабрика Петроградъ (Россия).
13500p(207.63)
Отзывов: 1
Рейтинг :

Boroxsk IX axe head

Отков головы топора ПЕТРОГРАДЪ, Боровск IX
Высота топора - 165±5 мм. Длина режущей кромки - 90±5 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 0,44кг.

В комплекте кожаный чехол для защиты лезвия. Отков отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для небольших плотницких работ и просто как универсальный топор. 
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.
Сделано в России

7500p(115.35)
Отзывов: 1
Рейтинг :

Polotsk 10 axe head

10500p(161.49) out of stock
Отзывов: 1
Рейтинг :
new

Муром 17 axe head

Голова топора ПЕТРОГРАДЪ, модель Муром 17. Муром 17 – это большой топор, предназначенный для плотницких работ. Прототипом послужил старинный топор, найденный в окрестностях города Муром. При конструировании топора использовались рекомендации Дмитрия Александровича Соколова (Проект "Старое-новое"). Производство фабрика Петроградъ (Россия).

 

10200p(156.88) out of stock
Отзывов: 1
Рейтинг :

Головы топоров ПЕТРОГРАДЪ

Для тех кто предпочитает самостоятельное изготовление топора под свои задачи, мы предлагаем ассортимент отковов или голов топора без ручек. Отков от фабрики Петроградъ это проверенные временем топоры, которые вы можете насадить на рукоять собственного изготовления и получить уникальный предмет с превосходными качествами.

Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels

Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.

2210p
Отзывов: 1
Рейтинг:

Petrograd Shovel Gouge 50mm

Стамеска полукруглая плотницкая Тотьма, предназначена для изготовления и зачистки продольных пазов и профилей, например при изготовлении сруба. Так же подойдет для удаления коры и декорирования поверхности на больших площадях. Рекомендована к использованию плотникам. Производство фабрика Петроградъ
14200p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2500p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Finnish type, 175mm/45mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2400p
Отзывов: 1
Рейтинг:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)

Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13900p
Отзывов: 1
Рейтинг:

Carving axe PETROGRAD, model Zvenigorod 7, handle n5

Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

  • Blade width 120 mm
  • Sharpening angle - 25 degrees
  • Hardness - 55-58HRc
  • Handle lenght - 350 mm
  • Full weight - 07 kg

Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.

Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

11200p
Отзывов: 1
Рейтинг:

Bent Gouge Rubankov, N7, 30mm

Bent Gouge Rubankov, N7, 30mm (1.8 inches)

Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5800p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N10

Carving set PETROGRAD, N10
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving chisel PETROGRAD, 8mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13200p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N11

Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
10230p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil*.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: left-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg
*coating may change from batch to batch
3600p
Отзывов: 1
Рейтинг: