new%

Wooden moulding plane PETROGRAD, half fillet left r20 mm, 20mm

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

12600p(0)
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, half ovolo, r10, 10mm

This light and beautifully made plane is great for making mouldings e.g. convex rounding. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. The shoe is made of maple, the sole is made of hornbeam. The width of the blade is 10,20,30 mm, the angle of the blade is 55 degrees. 

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

item code width mm radius mm
М00014901 10 10
М00014902 20 20
М00014903 30 25,4
12500p(0)
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, ovolo and cove, N1

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, thickness minimum 2 mm, thickness maximum 3.4 mm. 
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.



14400p(0)
Отзывов: 1
Рейтинг :
new

Wooden moulding plane PETROGRAD, cove, N2

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, thickness minimum 2 mm, thickness maximum 3.4 mm. 
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.



12600p(0)
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, cove, N3

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, thickness minimum 2 mm, thickness maximum 3.4 mm. 
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.



12600p(0)
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, ovolo and cove N4

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, thickness minimum 2 mm, thickness maximum 3.4 mm. 
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.



12600p(0)
Отзывов: 1
Рейтинг :
%

Wooden moulding plane PETROGRAD, ogee N6

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC. Dimensions: total length 175 mm, thickness minimum 2 mm, thickness maximum 3.4 mm. 
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.



12600p(0) out of stock
Отзывов: 1
Рейтинг :
%

Wooden moulding plane PETROGRAD,half fillet right, r20 mm, 20mm

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

12600p(0)
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, fillet r10, 10mm

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

12500p(0)
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, half ovolo, r20, 20mm

This light and beautifully made plane is great for making mouldings e.g. convex rounding. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. The shoe is made of maple, the sole is made of hornbeam. The width of the blade is 10,20,30 mm, the angle of the blade is 55 degrees. 

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

item code width mm radius mm
М00014901 10 10
М00014902 20 20
М00014903 30 25,4
12900p(0)
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, fillet r20, 20mm

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

12900p(0)
Отзывов: 1
Рейтинг :
new

Panel plane PETROGRAD 25mm / 250mm

Production - factory of joinery and carpentry tools PETROGRAD.
This lightweight and beautifully executed plane is perfect for making figarium fields (panels). The shoe and the wedge are made of maple and impregnated with primer oil - in one layer and the second layer is covered with oil and wax. Knife width 25 mm, tilt angle 55 degrees, bed turn 5 ° from perpendicular to the sidewall. Each knife is tested with a hardness tester. The hard side has 2 points from the diamond cone - test, and control test. The knife has the following dimensions: working part width 25 mm, total length 175 mm. The piece of iron is made of steel 9XC. Hardened to 59-61 HRC. All glands are wedge-shaped with a wedge angle of 0.5 degrees.

12700p(0)
Отзывов: 1
Рейтинг :
new

Wooden moulding plane PETROGRAD, fillet r3, 6mm

Рубанки-галтельные ПЕТРОГРАДЪ.  Этот легкий и красиво выполненный рубанок, отлично подходит для изготовления рамок и фризов. Рубанок предназначен для формирования галтелей. Производство – фабрика Петроградъ (Россия). 

12200p(0)
Отзывов: 1
Рейтинг :
new

Wooden moulding plane PETROGRAD, fillet r5, 6mm

Рубанки-галтельные ПЕТРОГРАДЪ.  Этот легкий и красиво выполненный рубанок, отлично подходит для изготовления рамок и фризов. Рубанок предназначен для формирования галтелей. Производство – фабрика Петроградъ (Россия).

12200p(0)
Отзывов: 1
Рейтинг :
new

Wooden moulding plane PETROGRAD, fillet r7, 10mm

Рубанки-галтельные ПЕТРОГРАДЪ.  Этот легкий и красиво выполненный рубанок, отлично подходит для изготовления рамок и фризов. Рубанок предназначен для формирования галтелей. Производство – фабрика Петроградъ (Россия).

12500p(0)
Отзывов: 1
Рейтинг :
new

Wooden moulding plane PETROGRAD, half ovolo, r3, 6mm

Рубанок-штап ПЕТРОГРАДЪ. Этот легкий и красиво выполненный рубанок отлично подходит для изготовления рамок и фризов. Рубанок предназначен для формирования штапа. Выпускается в нескольких размерах. Производство – фабрика Петроградъ (Россия).

12200p(0)
Отзывов: 1
Рейтинг :
new

Wooden moulding plane PETROGRAD, half ovolo, r7, 10mm

Рубанок-штап ПЕТРОГРАДЪ. Этот легкий и красиво выполненный рубанок отлично подходит для изготовления рамок и фризов. Рубанок предназначен для формирования штапа. Выпускается в нескольких размерах. Производство – фабрика Петроградъ (Россия).

12500p(0)
Отзывов: 1
Рейтинг :
new

Wooden moulding plane PETROGRAD, half ovolo, r5, 06mm

Рубанок-штап ПЕТРОГРАДЪ. Этот легкий и красиво выполненный рубанок отлично подходит для изготовления рамок и фризов. Рубанок предназначен для формирования штапа. Выпускается в нескольких размерах. Производство – фабрика Петроградъ (Россия).

12200p(0)
Отзывов: 1
Рейтинг :
%

Wooden moulding plane PETROGRAD, fillet r25.4,30mm

Traditional wooden plane. The shoe is made of maple, the sole is made of hornbeam. The wedge is also made of maple, easy to install and remove.This light and beautifully made plane is great for making mouldings. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. 

The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC.
All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

 

12900p(0) out of stock
Отзывов: 1
Рейтинг :

Wooden moulding plane PETROGRAD, half ovolo, r25.4, 30mm

This light and beautifully made plane is great for making mouldings e.g. convex rounding. The plane is designed to form a finished profile with the possibility of combining with other profiles to obtain the desired result. The shoe is made of maple, the sole is made of hornbeam. The width of the blade is 10,20,30 mm, the angle of the blade is 55 degrees. 

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

item code width mm radius mm
М00014901 10 10
М00014902 20 20
М00014903 30 25,4
12900p(0) out of stock
Отзывов: 1
Рейтинг :

Калёвки

Рубанки от инструментальной фабрики Петроградъ (Россия) это красивая и непревзойденная по качеству штучная продукция для настоящих ценителей ручной работы. Все комплектующие изготавливаются и обрабатываются силами настоящих профессионалов своего дела.

Все железки (рубаночные ножи) производятся на месте, имеют клиновидный спуск с углом 0,5 градуса. Это выгодно отличает их от других рубаночных ножей, и делает их идеально подходящими для деревянных рубанков с клиновой фиксацией ножа.
Рабочая сторона ножа, закалённая до твёрдости 59-61HRc, помечена небольшими отверстиями, остающимися от проверки ножа твёрдомером. Эти отверстия, имеющиеся на каждом ноже, являются свидетельством проверки ножей и не влияют на работоспособность изделия.

Колодки рубанков выполнены из отобранной древесины, вылеживаются и только затем обрабатываются высококласными мастерами. Работу по производству наших рубанков вы можете увидеть на ютубе и в социальных сетях компании.

Ассортимент ручных рубанков Петроградъ постоянно пополняется и насчитывает на сегодня: 28 моделей рубанков, начиная от классических выглаживающих рубанков и заканчивая экзотикой типа грунтубелей, фальцгобелей и рубанков калевочного типа.

Приобретая рубанок от фабрики Петроградъ в покупаете качественную и надежную вещь которая будет служить и радовать вас годами.

Видеоматериалы

youtube video

Нож для резьбы по дереву, ПЕТРОГРАДЪ, Богородский, 200мм/60мм

Нож резчицкий ПЕТРОГРАДЪ, Богородский, 190мм/60мм. Резчицкие ножи общего назначения, а также для большого удаления материала. Отличный нож как для начинающих так и для профессионалов. Все ножи заточены и готовы к работе.
Для выбора нужного ножа нажмите на название товара
2700p
Отзывов: 1
Рейтинг:

Нож для резьбы по дереву, ПЕТРОГРАДЪ, финский, 180мм/40мм

Резчицкие ножи с острым кончиком предназначены для деталировки и работы в труднодоступных местах. Длина лезвия 45мм или 60мм, скругленный обух. Угол заточки 23±2°. Удобная овальная рукоять из ценных пород древесины, покрыта маслом. Длина рукояти - 115мм. Отличный нож как для начинающих так и для профессионалов. Лезвие толщиной 2,5мм выполнено из высокоуглеродистой стали с закалкой до твердости 59-61 HRc. Все резцы заточены и готовы к работе. Производство Петроград (Россия).
Для выбора нужного ножа нажмите на название товара
2500p
Отзывов: 1
Рейтинг:

Резец для чекеринга C-1, 60° (одна РК)

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Резец для чекеринга C-1, 90° (одна РК)

Резец C-1, имеет 1 пирамидальный зуб. Угол вершины 90 и 60 градусов. Резец продается в сборе, имеют удобную рукоять из бука и шток с установленной на нем рабочей частью. Все резцы изготовлены из стали, прошли процесс закалки и обработки, для продолжительной и надежной работы.
Имеет V-образную форму с зубцами по обе стороны. Резец С-1 предназначен для нанесения оригинального макета рисунка, а также для углубления канавок после их нанесения, другими резцами.
Деревянная рукоятка хорошо сбалансирована и удобно лежит в руке.
На фотографии детально показаны зубцы. Обратите внимание на высокую рельефность, обеспечивающую быструю и ровную нарезку. Зубцы обеспечивает хорошее удаление всех твердых пород древесины.
Резцу все равно, что вырезать глубокие или мелкие пазы, прямые или закругленные углы, параллельные линии или перекрестную штриховку, по направлению волокна или поперек. Не нужно заново делать проход, чтобы обработать неровные участки. Ровной получается каждый элемент.

Ширина рабочей части 5 мм, длина рабочей части 11 мм, угол вершины 90 и 60 градусов.

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

900p
Отзывов: 1
Рейтинг:

Топор кованый ПЕТРОГРАДЪ, модель Рославль 7, топорище н11, РК - сканди

Топор кованный походный с изогнутой рукоятью. Общая длина - 370 мм. Высота топора - 140 мм. Длина режущей кромки - 120 мм. Топор выкован вручную из стали 65Г. Заточка прямая. Общая масса - 0,7 ± 0,05 кг. В комплекте кожаный чехол для защиты лезвия. Топорище выполнено из древесины клёна, длиной 320 мм. Топор отлично сбалансирован и подойдет для огромного вида работ, как походный топор, для небольших плотницких и столярных работ и просто как универсальный топор. 

Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ.

Сделано в России

13000p
Отзывов: 1
Рейтинг:
new

Нож для резьбы по дереву, ПЕТРОГРАДЪ, Ложкорез, модель N1/22, левый

Ложкорез по дереву ПЕТРОГРАДЪ модель N1/22, это инструмент для резьбы деревянных ложек и других впуклых поверхностей. Основная задача ложкореза - выборка лунки в деревянной ложке (черпало). Выпускается двух видов: правый и левый. Производство фабрика Петроградъ (Россия)

3200p
Отзывов: 1
Рейтинг:
new

Нож для резьбы по дереву, ПЕТРОГРАДЪ, флажок 45град, 180мм/40мм

Нож для резьбы по дереву, ПЕТРОГРАДЪ, косая заточка 45град. Предназначен для широкого спектра работ. Рукоять выполнена из ясеня, угол скоса 45 градусов, инструментальная сталь. Производство фабрика Петроградъ (Россия).

2500p
Отзывов: 1
Рейтинг:

Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм

Стамеска ПЕТРОГРАДЪ, серия Нева, 6мм. Стамески спроектированы, ориентируясь на многолетний опыт мастеров-краснодеревщиков. Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при подрезке и подчитки шиповых соединений: ласточкин хвост, шип-проушина, впол дерева, сковородней и прочие. Производятся с различной шириной полотна от 3мм до 26мм. Толщина лезвия переменная и увеличивается от режущей кромки к рукояти. Производство фабрика Петроградъ (Россия)

3300p
Отзывов: 1
Рейтинг:
new%

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25

Топор кованый ПЕТРОГРАДЪ, модель Рославль 10, топорище н25. Отличается от других топоров удлиненной режущей кромкой. Благодаря этой особенности топор можно брать близким к полотну хватом и не бояться поранить руку при работе. Такой хват очень удобен при тёске и ошкуривании бревен. Удлиненная рукоять позволяет без лишних усилий рубить ветки и сучья. Производство фабрика Петроградъ (Россия).

15000p
Отзывов: 1
Рейтинг:
new

Масло камелии, KAPLEUM, Лаванда, 60 мл.

Масло камелии, KAPLEUM, Лаванда, 60 мл. Неформальная творческая группа GILDIA.PRO предлагает новый продукт, изготовленный на основе отлично зарекомендовавшего себя масла Камелии – KAPLEUM.

 

720p
Отзывов: 1
Рейтинг: