Categories
Petrograd Carver's Table Vise
This vise is a device that expands the arsenal of any master and not only a carver. The vice is installed on a workbench or other work surface, thereby raising the workpiece to a comfortable height for working with a cutting tool. They are attached to the working surface with clamps or jacks (not included). Solid beech vise. Hornbeam screws. Covered in oil.
The design of the vice is made using classic joinery joints, which provides them with high strength and stability. The considerable thickness of the upper shield and the height of the vice itself allows the use of jacks or clamps as clamps.
12 holes are drilled in the tabletop and 4 in the front jaw of the vise for the tuning pegs. This is done for the convenience of fixing flat blanks of various irregular shapes. Pegs are installed in these holes, which serve as stops for the workpiece. The vise clamping jaw with two screws firmly fixes the workpiece.
It is recommended to periodically lubricate the screws with wax for smooth running.
Overall dimensions: 480x490x130. The thickness of the jaws is 45mm. Tabletop thickness 43mm.
Maximum width of the workpiece to be clamped (distance between screws) 380mm.
Maximum workpiece thickness (screw travel) - 30mm.
We reserve the right to make minor design changes to improve vise performance.
The vice was developed by Sergey Aleksandrovich Klein.
Production of the PETROGRAD factory, Russia
PETROGRAD Shooting Board, type 3
Упор "Ослиные уши" на донце ПЕТРОГРАДЪ модель 2. Этот упор позволяет вам острогать торец заготовки под 45 градусов. Упор устанавливается в донце вместо стационарного упора. Производство – фабрика Петроградъ (Россия).
Workbench 725*260 mm, desktop, Milkmans workbench
Angle stop for PETROGRAD Shooting Board, type 2, 44mm
Spare plank for angle stop for PETROGRAD Shooting Board, type 2, 260mm*22мм*8мм
Workbench 980*260 mm, desktop, Milkmans workbench
Прижимная планка для верстака Milkman's workbench 980*260мм.Предназначена для установки в настольные верстаки Milkman's Workbench. Выполнены из бука. Производство – фабрика Петроградъ (Россия).
Petrograd Table lamp, `Spark +` model, black ash
Настольная лампа мощностью 5 Вт - идеальное сочетание классических форм и материалов, с современными технологиями, для Вашей комфортной работы:
Верстак настольный, DIY-Master, 740мм*370мм
Верстак настольный, CabinetMaker, 740мм*370мм. Представляет собой компактный и крайне функциональный верстак, позволяющий использовать не только стандартные верстачные упоры, но и струбцины для работы с шинами. В комплекте идет 2 струбцины. Производство фабрика Петроградъ (Россия).
PETROGRAD Shooting Board, type 2, 630mm*450mm, Right Hand
Донце ПЕТРОГРАДЪ, модель 2, 630мм*450мм. Это специальное приспособление для работы с рубанком. Предназначено для точной подгонки торцов деталей под заданный угол при изготовлении столярных соединений, многоугольных конструкций, таких как рамки, обкладки столов и другие конструкции. Очень удобно для прифуговки делянок небольшого размер, например, для создания поликов для мебельных ящичков. Производство фабрика Петроградъ (Россия)
Petrograd table workbench 500*350mm
Верстак настольный 500*350мм, Shipmodeller. Этот верстак выполнен из массива бука и предназначен для установки на любую удобную вам поверхность. Наилучшим образом подходит для небольших работа по дереву, таких, как судомоделизм. Производство фабрика Петроградъ (Россия).
Workbench 725*260 mm, desktop, Milkmans workbench
Design features: beech shield of our own production with symmetrically placed two rows of mounting holes for 19 mm tuning pegs. The workbench comes with 2 pegs (link to pegs). On the front side, the workbench has a number of threaded holes (4 holes) for installing clamp screws. The diameter of the wooden screws is 25 mm. A vise with a wooden screw and a 19 mm hole for pegs is installed at the end, the jaws of which are covered with leather pads to prevent jamming of the workpieces. The harness is assembled on a straight open thorn-eye and reinforced with a dowel made of hardwood.
To avoid cracking and deformation of the workbench, as well as breakage of wooden screws during transport, the screws have been removed from the workbench. Two short screws are simply screwed into the front holes. Before installing the long screw, it is necessary to unscrew two self-tapping screws from the cracker and remove two keys. Then screw the wooden screw all the way into the cracker and install the dowels back, tighten the self-tapping screws. Crackers and wooden screws are made to compensate for seasonal fluctuations in humidity. It does not affect working qualities and functionality, but prevents jamming of moving elements and unnecessary stress on the workbench.
The workbench (Milkmans workbench) is symmetrical, two planes are working, that is, it is convenient to use both left-handers and right-handers.
Additional features of the tabletop workbench:
The maximum length of the workpiece clamped in the pegs is 510 mm.
Dimensions of the workpiece clamped in a vice (cracker) - 125x110 mm.
Dimensions of the part clamped in a longitudinal vice with two screws - 375x50 mm
Design and execution by RUBANKOV carpentry master Sasin Vladimir Ivanovich.
made in Russia.
Workbench 980*260 mm, desktop, Milkman's workbench
Design features: beech shield of our own production with symmetrically placed two rows of mounting holes for 19 mm tuning pegs. The workbench comes with 2 pegs. On the front side, the workbench has a number of threaded holes (4 holes) for installing clamp screws. The diameter of the wooden screws is 25 mm. A vise with a wooden screw and a 19 mm hole for pegs is installed at the end, the jaws of which are covered with leather pads to prevent jamming of the workpieces. The harness is assembled on a straight open thorn-eye and reinforced with a dowel made of hardwood.
To avoid cracking and deformation of the workbench, as well as breakage of wooden screws during transport, the screws have been removed from the workbench. Two short screws are simply screwed into the front holes. Before installing the long screw, it is necessary to unscrew two self-tapping screws from the cracker and remove two keys. Then screw the wooden screw all the way into the cracker and install the dowels back, tighten the self-tapping screws. Crackers and wooden screws are made to compensate for seasonal fluctuations in humidity. It does not affect working qualities and functionality, but prevents jamming of moving elements and unnecessary stress on the workbench.
The workbench (Milkmans workbench) is symmetrical, two planes are working, that is, it is convenient to use both left-handers and right-handers.
Additional features of the tabletop workbench:
The maximum length of the workpiece clamped in the pegs is 710 mm.
Dimensions of the workpiece clamped in a vice (cracker) - 125x110 mm.
Dimensions of the part clamped in a longitudinal vice with two screws - 630x50 mm
Design and execution by RUBANKOV carpentry master Sasin Vladimir Ivanovich.
made in Russia.
Workbench 700*270 mm, desktop, Japanese type
Верстачная доска (Японский верстак)
Габариты: высота 120 мм, ширина 285 мм, длина 700 мм, толщина верстачной доски около 42 мм.
Материалы: верстак выполнен из массива бука, упор-шпонка выполнена из массива клена, все детали верстака покрыты тунговым маслом.
Настольные верстаки
Popular goods
Carving knife PETROGRAD, Bogorodsky type, 170mm/40mm
Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Carving knife PETROGRAD, skew type, 30 degrees
Производство - фабрика столярных и плотницких инструментов ПЕТРОГРАДЪ. Ножи-косяки с углом скоса 30, 40 градусов двухсторонняя заточка. Длина лезвия - 40 мм, ширина 13 мм, прямой обух. Удобная овальная рукоять из красного дерева пропитана маслом и покрыта шеллаком. Длина рукояти - 140 мм. Нож для широкого спектра работ. Лезвие толщиной 2,5 мм выполнено из стали 65Г с закалкой до твердости 59-61 HRc. Заточен и готов к работе.
Сделано в России
Adze PETROGRAD, type N2, half round, inside bevel
Adze N2 created on the basis of a study of ancient tools, made in the northern regions of Russia and now stored in our Museum of Ancient Instruments.
Forged tempered to hardness - 58-60HRc. The adze is made of spring steel 65 g (Germany 66Mn4, Ck67, USA 1066). The width of the blade is 70 mm. Total length - 500 mm. Weight - 1.3 kg.
Totally hand made at PETROGRAD factory of joinery and carpentry tools.
Made in Russia
Carving set PETROGRAD, N2
The set includes:
Carving knife PETROGRAD, Bogorodsky type, 155mm/40mm
Carving knife PETROGRAD, Finnish type, 175mm/60mm
Carving knife PETROGRAD, skew 30 deg, 155mm/40mm
Carving knife PETROGRAD, Swedish type, 175mm/60mm
Spoon knife, PETROGRAD, D 27mm, right-handed
Carving chisel, PETROGRAD, 10mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
The tools are made of steel 65G (Germany 66Mn4, Ck67, USA 1066) and have handles made of beech and maple covered with tung oil.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
Checkering tool complete N2-20, 60°
Checkering tool No2. Both sides with teeth. Used for the application of grooves and their deepening after application. One blade runs along the guideline, while the other marks the next groove. When moving to the next groove, the tool deepens it and again applies the next groove. Cutter 2 It is a combination of tools for expanding and deepening grooves. Beech handle. All the cutters are made of steel, underwent a process of hardening and processing, for long and reliable work.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
| Item code | Item | Cutting angle |
Teeth per inch |
| М00015687 | N2-16 | 60° | 16 |
| М00015638 | N2-16 | 90° | 16 |
| М00015688 | N2-18 | 60° | 18 |
| М00015669 | N2-18 | 90° | 18 |
| М00015689 | N2-20 | 60° | 20 |
| М00015662 | N2-20 | 90° | 20 |
| М00015690 | N2-22 | 60° | 22 |
| М00015637 | N2-22 | 90° | 22 |
| М00015691 | N2-24 | 60° | 24 |
| М00015676 | N2-24 | 90° | 24 |
Dressing stone, PETROGRAD, 20*20*70mm
Slurry stone PETROGRAD # 4000, water stone based on quartz grain 3 microns. on a ceramic bond, having an indication in the marking of grit according to Jis.
Nagura # 4000 for surface correction and soaping
This stone is used to correct small irregularities after sharpening and leveling shallow scratches on the surface of the stone.
To fully enjoy your stones, use Nagura before and after work. It cleans the surface of the grinding stone, allowing you to keep it in working condition. Please use a bar with enough water.
Size is about 70*20*20 mm
Gross weight 45 g
Net weight 34 g
Leather belt bag PETROGRAD, n1, 150mm*100mm
Сумка подвесная ПЕТРОГРАДЪ, на ремень, н1, 150мм*100мм. Дизайнерская сумка для документов и мелочи. Выполнена из натуральной кожи. Имеет возможность регулировки плотности закрытия крышки. Производство фабрика Петроградъ (Россия).
Sharpening stone PETROGRAD, 200*70*20mm, 360 grit
Abrasive water stones. Grit: 150, 360, 500, 800, 1000,1500, 2000 and 4000 grit. Size 200x70x20mm. The abrasive grain is silicon carbide. Bond - ceramics. Hardness I ensures minimal wear of the stone during work. Steel does not overheat when sharpening. Does not require oil. Soak in water for 2-10 minutes before use. Designed for sharpening steels and hard alloys. Manufactured in Russia.
Leather belt PETROGRAD, hand made, type 1, 140cm
Bevel edge chisel, PETROGRAD, model Volga, 12mm
Форма лезвия имеет боковые скосы для работы в труднодоступных местах, например при доработке шиповых соединений и соединений на ласточкин хвост. Толщина лезвия переменная и увеличивается от РК к рукояти.
Полотно из инструментальной высоколегированной стали, закалено до 61HRc. Спинка столярной стамески или рабочая сторона выровнена на плоскошлифовальных станках. Стамески Волга производства фабрики Петроградъ заточены и готовы к работе. Заводской угол заточки 25град.
Деревянная рукоять выполнена из твердых пород древесины, усилена латунным кольцом для силовой работы с киянкой.