new

Wooden shoulder plane PETROGRAD, skew blade, 20mm/250mm

Wooden rabbet hand plane is light and all round good for tool making and other woodwork.

  • The sole is made of hornbeam wood, main body made of maple and soaked with tung oil.
  • Blade dimensions: width 20 mm, total length 175 mm, skew angle ~10 degrees.
  • Blade maximum thickness 3.4 mm, minimum shank thickness 2 mm, shank width 5.5 mm.
  • Blade set angle is 55 degrees (Middle Pitch).
  • The plane blade is made of steel 9ХС (DIN - 150Cr14). Hardened to 59-61 HRC.

 All blades are wedge-shaped with an angle of 0.5 degrees. This form is favorably distinguishes this blades from other blades on makret. This form isperfect suited for wooden planes with wedge fixation.

Blades have two sides: one is hard, the other is soft (production feature).
Every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.
Hand planes had manufactured by Petrograd toolworks in Saint Petersburg Russia.

9000p(138.42)
Отзывов: 1
Рейтинг :
new

Wooden bench plane PETROGRAD, 50mm/230mm

Classic bench plane with brass cap and wedge shaped blade. This is a common wooden hand plane for surface flattening. Sole of hand plane was made of hard wood. We had replace the wooden wedge with brass cap mechanism for more secure fix and for minimizing vibrations of hand plane blade during the work.

  • lenght of sole - 230mm
  • width of blade - 50mm

Fixing cap is mounted on a strong steel stud, the knob acts as a lever. This design of the clamping cap allows for quick and accurate adjustment of the blade overhang. Body of hand plane was coated with oil. Blade installation angle - 50 °. The blade made of alloy tool steel and hardened to a hardness of 59-61HRC.

  • blade installation angle - 50 °
  • blade dimensions: length - 175mm
  • blade width - 50mm
  • blade shape - wedge
  • The minimum thickness of the blade is 2.2 mm, the maximum thickness is 3.5 mm
  • The blade sharpening angle is 25 ° and the micro chamfer on the edge is 30 °

Hand plane was produced by Petrograd toolworks in Saint Petersburg Russia.

Hand plane Specification:
Weight: 0.93 kg
Type: Bench plane N4
Blade Steel: ШХ15 (alloy tool steel)
Blade shape: wedge
Blade hardness: 59-61HRc
Edge blade: Straight
Blade lenght: 175 mm
Blade width: 50 mm
Sole material: hornbeam
Body material: maple
Handle material: Oak*
Sole lenght: 230 mm
* handle material can various from batch to batch
12550p(193.02)
Отзывов: 1
Рейтинг :

Wooden jointer plane PETROGRAD, 65mm/600mm

Traditional wooden jointer. The plane is made of maple with brass insert for reliable fixation of the blade, the sole is made of hornbeam, the handle is made of paduk. Coating - tung oil and wax. The wedge is also made of maple. The installation angle of the knife is 50°. The blade is made of alloyed tool steel 9XC (DIN - 150Cr14) hardened to 59-61 HRC. Blade dimensions: length - 175 mm, width - 65 mm, knife thickness minimum 3.5 mm, maximum thickness - 4.8 mm. Sharpening angle 25° with microbevel 30°. Dimensions of jointer plane 600 * 90 * 175 mm.

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

18400p(282.99)
Отзывов: 1
Рейтинг :

Wooden jointer plane PETROGRAD, 65mm/780mm

Traditional wooden jointer. The plane is made of maple with brass insert for reliable fixation of the blade, the sole is made of hornbeam, the handle is made of paduk. Coating - tung oil and wax. The wedge is also made of maple. The installation angle of the knife is 50°. The blade is made of alloyed tool steel 9XC (DIN - 150Cr14) hardened to 59-61 HRC. Blade dimensions: length - 175 mm, width - 65 mm, knife thickness minimum 3.5 mm, maximum thickness - 4.8 mm. Sharpening angle 25° with microbevel 30°. Dimensions of jointer plane 780 * 90 * 175 mm.

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

25600p(393.73)
Отзывов: 1
Рейтинг :

Wooden shoulder plane PETROGRAD, Bullnose, 20mm/200mm

This shoulder plane can be used both for making a groove or a quarter, as well as for easy processing of edges and areas of abutment of parts to each other in the assembled state. The block is made of maple, the wedge is made of mahogany and soaked with tung oil. The width of the knife is 20 mm, the angle of inclination of the bed to the sole is 45 degrees. Absolutely every knife is tested with a hardness tester. The solid side has 2 points from the diamond cone - the test, and the control test. The knife has the following dimensions: the width of the working part is 20 mm, the angle of grinding is 30 degrees, the maximum thickness is 5.2 mm, the minimum thickness of the shank is 4 mm, the total length is 175 mm. The blade is made of steel 9ХС (DIN - 150Cr14), hardened to 59-61 HRC. All blades are wedge-shaped with a wedge angle of 0.5 degrees.

Dimensions of plane: 175x130x20 mm.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

8000p(123.04) out of stock
Отзывов: 1
Рейтинг :
new

Zelland plane n32, rosewood handles

Рубанки Zelland н32, 100мм/34мм – это компактные торцовочные рубанки, относящиеся к Dovetailed hand plane. Впервые рубанки с низкой уcтановкой ножа (low angle hand planes) появились в 1905 году. На сегодняшний день существует всего несколько известных производителей рубанков ручной сборки, одними из них являются Karl Holtey и Lazarus. Представленный рубанок производен мастерской Zelland (Россия).

35000p(538.3)
Отзывов: 1
Рейтинг :
new

Рубанок Zelland н32, 100мм/34мм, самшит

Рубанки Zelland н32, 100мм/34мм – это компактные торцовочные рубанки, относящиеся к Dovetailed hand plane. Впервые рубанки с низкой уcтановкой ножа (low angle hand planes) появились в 1905 году. На сегодняшний день существует всего несколько известных производителей рубанков ручной сборки, одними из них являются Karl Holtey и Lazarus. Представленный рубанок производен мастерской Zelland (Россия).

35000p(538.3)
Отзывов: 1
Рейтинг :
new

Zelland n11 Miter Plane

Рубанок Zelland н11 Miter Plane – это крайне интересный рубанок, по своей форме он напоминает miter plane Lie-Nielsen. Этот тип рубанков предназначен для строгания торцов, в том числе может быть использован в донце. Отличительной особенностью рубанка является широкий нож и внушительная масса, которая обеспечивает инерцию при строгании. Это позволяет сделать работу рубанком более плавной. Производство – Zelland (Россия).

65000p(999.7)
Отзывов: 1
Рейтинг :
new

Petrograd Wooden Block Plane, 30mm/150mm, beech

Рубанок деревянный ПЕТРОГРАДЪ, 150мм / 30мм, Block Plane – самый простой в линейке деревянных рубанков ПЕТРОГРАДЪ. За счет упрощения конструкции колодки удалось добиться снижения стоимости рубанка. Этот инструмент обладает всеми достоинствами деревянных "одинарников" от фабрики Петроградъ.

 

6900p(106.12)
Отзывов: 1
Рейтинг :
new

Petrograd Wooden Block Plane, 30mm/150mm, black hornbeam

Рубанок деревянный ПЕТРОГРАДЪ, 150мм / 30мм, Block Plane, чёрный граб – это уникальное исполнение классического рубанка Block Plane Петроградъ. В отличие от базовой версии, этот рубанок выполнен из черного граба, что придает ему поистине уникальный облик. Ручная работа. Производство – фабрика Петроградъ (Россия).

15900p(244.54) out of stock
Отзывов: 1
Рейтинг :

Wooden apron plane PETROGRAD, 30mm/150mm

Traditional wooden small plane, the so-called "apron hand plane". This small hand plane uses for various types of work, it is always at hand, fit in the pocket of your clothes or apron.

  • body of hand plane is made of hornbeam
  • wedge made of mahogany
  • hand plane dimensions: 150x45x69 mm
  • coating - oil and wax

Blade installed in hand plane body with 45 degrees angle and fixed by wooden wedge.

  • blade was made of alloyed tool steel 9XC (DIN - 150Cr14)
  • hardned to 59-61 HRC.
  • blade length - 79 mm
  • blade width - 30 mm
  • blade shape - wedge
  • blade thickness minimum 4.8 mm
  • maximum thickness - 5.2 mm.
  • sharpening edge is 30 °

All PETROGRAD hand plane blades have a wedge-shaped descent with an angle of 0.5 degrees. This distinguishes them favorably from other plane blades, and makes them ideal for wooden planes with a wedge fixation. The working side of the knife, hardened to a hardness of 59-61 HRc, is marked with small indentations, which remain from the hardness gauge after checking the knife. These recesses, which are located on each blade, are evidence of checking blades and do not affect the performance of the product.

IMPORTANT! The reverse side of the knife, not marked with control points, is not working!
The manufacturer reserves the right to change the thickness of the knife without degrading the working qualities of the tool.

Hand made by Petrograd toolworks in Saint Petersburg Russia.

8550p(131.5)
Отзывов: 2
Рейтинг :

Wooden plane PETROGRAD, Gerfschaaf type

Рубанок деревянный ПЕТРОГРАДЪ, 165мм / 30мм, голландский тип (Gerfschaaf) это классический "фартучный" рубанок, основным предназначением которого издревле была работа за пределами мастерской. Образцом для создания рубанка голландского типа стал рубанок, известный под названием Gerfschaaf и хранящийся В Музее-Мастерской Рубанков. Производство фабрика Петроградъ (Россия).

8550p(131.5) out of stock
Отзывов: 1
Рейтинг :
new

Wooden plane PETROGRAD, German type

Рубанок деревянный ПЕТРОГРАДЪ, 220мм / 40мм, немецкий тип. Рубанок выполнен по мотивам деревянных рубанков немецкого типа, хранящихся в коллекции Музея Старинных Инструментов. Производство фабрика Петроградъ (Россия).

9850p(151.49)
Отзывов: 1
Рейтинг :
new

Wooden plane PETROGRAD, Jack plane

Рубанок ПЕТРОГРАДЪ, 50мм/320мм (полуфуганок). Традиционный ручной деревянный полуфуганок. Рубанки данного типа и размера предназначены в первую очередь для выравнивания небольших деревянных щитов и делянок. После выравнивания изделие выглаживается чистовым рубанком с "двойной железкой" *. Деревянный рубанок легок, изящен и прекрасно скользит по заготовкам. Рубанки марки ПЕТРОГРАДЪ изготавливаются вручную, опытными мастерами и преподавателями столярной школы Rubankov.
14800p(227.62)
Отзывов: 1
Рейтинг :
new

Рубанок для кумико ПЕТРОГРАДЪ, 250мм / 30мм

Рубанок для кумико ПЕТРОГРАДЪ, 250мм / 30мм -  рубанок для кумико. Подошва имеет скос для удобства строгания в донце для кумико. Производство фабрика Петроградъ (Россия).
7900p(121.5)
Отзывов: 1
Рейтинг :
new%

PETROGRAD Edge-Trimming Plane 165mm / 30mm

Рубанок для фасок и кромок, ПЕТРОГРАДЪ, 150мм / 30мм. Это крайне интересный инструмент, представляющий собой 3 рубанка в одном! С его помощью вы можете сделать фаску 45 градусов, острогать кромку в 90 градусов, или просто использовать этот рубанок как обычный, убрав упор с подошвы. Производство фабрика Петроградъ (Россия).

 

9000p(138.42) out of stock
Отзывов: 1
Рейтинг :
new

PETROGRAD Edge-Trimming Plane 165mm / 30mm

Рубанок для фасок и кромок, ПЕТРОГРАДЪ, 150мм / 30мм, с латунной сайкой – это крайне интересный инструмент, представляющий собой 3 рубанка в одном! С его помощью вы можете сделать фаску 45 градусов, острогать кромку в 90 градусов, или просто использовать этот рубанок как обычный, убрав упор с подошвы. Производство фабрика Петроградъ (Россия).

9600p(147.65)
Отзывов: 1
Рейтинг :
new

Panel plane PETROGRAD 50mm / 250mm

Рубанок фигарейный ПЕТРОГРАДЪ, 50мм/250мм – это полноформатный рубанок для создания фигарейного поля с шириной 50 мм. Колодка и клин выполнены из клёна и пропитана грунтовочным маслом - в один слой и вторым слоем покрыто маслом и воском.Производство – фабрика Петроградъ (Россия).

15900p(244.54) out of stock
Отзывов: 1
Рейтинг :

Circular Plane PETROGRAD with convex edge

Circular Plane PETROGRAD with convex edge is intended for making of curvilinear surfaces. The body of the plane is made of maple and has an insert of brass for reliable fixation of the blade. Coating - tung oil. The wedge is also made of maple. Dimensions of plane 200*80*46 mm. Buckling radius 650 mm. Cross bend radius 250 mm.

The blade is made of alloyed tool steel 9XC (DIN - 150Cr14) hardened to 59-61 HRC. Blade dimensions: length - 110 mm, width - 30 mm, thickness minimum 3.2 mm, maximum thickness - 4.5 mm. Radius of the cutting edge of a blade 50 mm. Sharpening angle 30°.

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

 

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

10000p(153.8) out of stock
Отзывов: 1
Рейтинг :

Circular plane PETROGRAD with straight edge

Circular plane PETROGRAD with straight cutting edge is intended for making of curvilinear surfaces. The body of the plane is made of maple and has an insert of brass for reliable fixation of the blade. Coating - tung oil. The wedge is also made of maple. Dimensions of plane 200*80*46 mm. Buckling radius 650 mm.

The blade is made of alloyed tool steel 9XC (DIN - 150Cr14) hardened to 59-61 HRC. Blade dimensions: length - 110 mm, width - 30 mm, thickness minimum 3.2 mm, maximum thickness - 4.5 mm. Sharpening angle 30 °. 

All blades are wedge-shaped with a wedge angle of 0.5 degrees, which favorably distinguishes them from others, and are ideally suited for wooden planes with wedge fixation.
Blades have two sides - one is hard, the other is soft (production feature)
Absolutely every blade is tested with a hardness tester.
The solid side has 2 points from the diamond cone - the test, and the control test.

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

The manufacturer reserves the right to change the thickness and appearance of the knife without degrading the working qualities of the tool.

9000p(138.42) out of stock
Отзывов: 1
Рейтинг :

Рубанки выглаживающие

Рубанки от инструментальной фабрики Петроградъ (Россия) это красивая и непревзойденная по качеству штучная продукция для настоящих ценителей ручной работы. Все комплектующие изготавливаются и обрабатываются силами настоящих профессионалов своего дела.

Все железки (рубаночные ножи) производятся на месте, имеют клиновидный спуск с углом 0,5 градуса. Это выгодно отличает их от других рубаночных ножей, и делает их идеально подходящими для деревянных рубанков с клиновой фиксацией ножа.
Рабочая сторона ножа, закалённая до твёрдости 59-61HRc, помечена небольшими отверстиями, остающимися от проверки ножа твёрдомером. Эти отверстия, имеющиеся на каждом ноже, являются свидетельством проверки ножей и не влияют на работоспособность изделия.

Колодки рубанков выполнены из отобранной древесины, вылеживаются и только затем обрабатываются высококласными мастерами. Работу по производству наших рубанков вы можете увидеть на ютубе и в социальных сетях компании.

Ассортимент ручных рубанков Петроградъ постоянно пополняется и насчитывает на сегодня: 28 моделей рубанков, начиная от классических выглаживающих рубанков и заканчивая экзотикой типа грунтубелей, фальцгобелей и рубанков калевочного типа.

Приобретая рубанок от фабрики Петроградъ в покупаете качественную и надежную вещь которая будет служить и радовать вас годами.

Видеоматериалы

youtube video
youtube video
youtube video
youtube video

Textile 16 pocket Tool Roll, PETROGRAD, 370*330mm, for chisels

Tool roll. Size - 370x330mm, 16 pockets. It is intended for storage of tools: cutters, chisels, knives. The maximum tool length is 300mm. Made of thick fabric - Furniture FLOCK, stitched seams.

2210p
Отзывов: 1
Рейтинг:

Petrograd Shovel Gouge 50mm

Стамеска полукруглая плотницкая Тотьма, предназначена для изготовления и зачистки продольных пазов и профилей, например при изготовлении сруба. Так же подойдет для удаления коры и декорирования поверхности на больших площадях. Рекомендована к использованию плотникам. Производство фабрика Петроградъ
14200p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Bogorodsky type, 200mm/60mm

Carving knives for general use, as well as for large material removal. Blade length 40mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to 59-61 HRc. All the knives are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2500p
Отзывов: 1
Рейтинг:

Carving knife PETROGRAD, Finnish type, 175mm/45mm

Carving knives with a sharp tip are designed for detailing and working in hard to reach places. Blade length 45mm or 60mm, rounded butt. A comfortable oval redwood handle is saturated with oil and covered with shellac. The length of the handle - 115mm. Excellent knife for both beginners and professionals. The 2.5 mm thick blade is made of high carbon steel hardened to a 59-61 HRc. All the cutters are sharpened and ready to go. Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

2400p
Отзывов: 1
Рейтинг:

Heavy Duty Corner Framing Chisel, PETROGRAD, model Yelnya, 540mm/300mm, 25mm*25mm (1`)

Forged corner carpenter chisel PETROGRAD 25*25 mm with a wooden handle are designed for hard work with wood. The blade is forged manually from steel ШХ15 (USA 52100, G52986, J19965; Germany 1.3505, 100Cr6, 102Cr6) and hardened to a hardness of 58-61 HRC. With the help of machining specified exact geometry. Designed for processing and cleaning the corners of deep grooves. The handles are made of ash and crimped with two stainless rings - one to prevent splitting wood near the handle, the second to harden the back of the bar when working with a mallet or hammer. A leather pad between the chisel and the grip allows you to dampen the blows. Available in 25 mm wide. Blade length 300 mm, total length 550 mm. The guarantee of 100% quality is a small hole on the back of the chisel - a trace from the diamond cone of the device for determining the hardness. This test passes every chisel.
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13900p
Отзывов: 1
Рейтинг:

Carving axe PETROGRAD, model Zvenigorod 7, handle n5

Wood carving axe Zvenigorod VII . This axe is made for artistic processing of wood, such as carving sculptures, bowl carving, dish carving and other stuff.

  • Blade width 120 mm
  • Sharpening angle - 25 degrees
  • Hardness - 55-58HRc
  • Handle lenght - 350 mm
  • Full weight - 07 kg

Carving axe Zvenigorod VII is quite small and easy to control. It's weight is about 650g, makes it maneuverable and allows you to work more accurate and precise.

The shape of the axe head was designed for carving operations where palm is resting extreamly close to axe head or even on the axe head. This design helps to exelent control of the axe even during long carving sessions. Grip above the head is used for trimming, stripping. This axe model was based on samples from museum "Rubankov" and finalized taking into account the wishes of wood carvers.

The axe head is hand forged from steel 65Г (spring steel) and hardened to 55 - 58 HRc at the cutting edge and along the entire beard, the rest part is normalized to HB280. This hardening allows you to hit the poll without the risk of creating a cracks in the metal.
Head has mounted to handle on 3 wedges, one along the head eye and two in cross section.

Cutting edge is razor sharp and ready to work out of the box. Sharpening angle - 30 degrees.

Axe handle is made of maple* and coated with Danish oil**. The hatchet handle has a longitudinal bend. In cross-section the handle has the shape of an egg, which is very convenient for good grip while carving. Handle has a hole for hanging.

Woodcarving axe Zvenigorod VII are product of Petrograd toolworks and supplied in a leather case for protection of the cutting edge and easy storage. Made in Saint-Petersburg Russia.

11200p
Отзывов: 1
Рейтинг:

Bent Gouge Rubankov, N7, 30mm

Bent Gouge Rubankov, N7, 30mm (1.8 inches)

Carving chisel "Rubankov" Bent Gouge N7, 30mm ( 1.8 inches ). Perfectly suits for volume carving and deep hollow carving. The width of the cutting edge is 30mm ( 1.8inches ). The total lenght of the gouge is 280mm (11.02inches ), blade lenght is 145mm ( 5.71inches ), the lenght of the handle is 135mm (5.31inches ). Made of alloy steel, hand forged and hardened to 59-61HRc. The comfortable and ergonomic oval handle is made of cherrywood ( may change) and coated with oil.

Gouge is sharpened, honed and fully ready to work out of the box.
This model is for hand cutting and can be used with a mallet.
Produced by PETROGRAD toolworks. ( Saint-Petersburg Russia )

5800p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N10

Carving set PETROGRAD, N10
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving gouge PETROGRAD, 8mm
Carving chisel PETROGRAD, 8mm
Textile 6 pocket Tool Roll, PETROGRAD, 360*260mm, for carving knives
Carving knife PETROGRAD, model Hatchet N1, skew, 27mm

Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.

13200p
Отзывов: 1
Рейтинг:
new

Carving set PETROGRAD, N11

Carving set PETROGRAD, N11
The set includes:
Carving chisel PETROGRAD, V-type, 60 degree
Carving gouge PETROGRAD, 3mm
Carving gouge PETROGRAD, 6mm
Carving chisel PETROGRAD, 8mm
Textile 4 pocket Tool Roll, PETROGRAD, 360*200mm
Totally hand made at PETROGRAD factory of joinery and carpentry tools. Made in Russia.
10230p
Отзывов: 1
Рейтинг:

Shallow Hook Knife, PETROGRAD, type 3, left-handed

Hook knife is used for cutting out a hollow in a wooden spoon or scoop, as well as for other similar work. Shallow hook knife N3 has a water drop profile of blade. That's making it perfectly choose for cut wooden spoons bowl. The left version of knife is designed to work with the left hand towards yourself or right hand to outside.

  • Hook knife blade made from tool steel (9ХС) and hardened up to 58-60HRC.
  • All hook cutters are sharpened and ready to go.
  • The outerside of the hook is ring-shaped and perfectly polished. Thats allow you to cut wood cleanly and smoothly without scoring.
  • The handle of the hook knife is made of maple and coated with oil*.

The right version of hook knife is designed to work with the right hand towards yourself, the left version - with the left hand towards yourself.
Made by Petrograd toolworks in Saint-Petersburg Russia.

Hook knife specifications:
Blade width: 12 mm
Blade lenght: 75 mm
Steel: 9ХС
Shape: hook
Handle grip: left-handed
Handle lenght: 160 mm
Total lenght: 235 mm
Weight: 0,1 kg
*coating may change from batch to batch
3600p
Отзывов: 1
Рейтинг: